Package Contents; Connecting The Headphones; Changing The Connection Cable - Sennheiser HD 660 S Instrucciones De Manejo

English | HD 660 S

Package contents

1 HD 660 S open, dynamic headphones
1 connection cable with 1/4" (6.35 mm) stereo
jack plug (connected ex works), unbalanced
1 connection cable with 4.4 mm Pentaconn
stereo jack plug, balanced
Your HD 660 S
A

Connecting the headphones*

▷
Select the suitable connection cable for the audio source to which you want to
connect the headphones and change the connection cable as described in
section C:
• 1/4" (6.35 mm) stereo jack plug, unbalanced (can also be connected to a
3.5 mm stereo jack socket by using the supplied adapter)
• 4.4 mm Pentaconn stereo jack plug, balanced
▷ Connect the headphones to your audio source.
B
Putting on the headphones and using them*
▷
Put on your headphones and then pull the ear cups down until they rest
comfortably over the ears. Make sure you wear them the right way round by
observing the "R" (right) and "L" (left) markings on the ear cup bands.
▷
For optimum sound quality, ensure that the ear cups are not covered.
C

Changing the connection cable*

▷ Make sure the "R" (right) and "L" (left) markings on the connectors match the
markings on the ear cups. The marking on the connectors must point outward.
▷ Insert the connector until it locks into place with an audible click.
* Illustrations can be found on the fold-out pages.
2
1 stereo jack adapter
(1/4" (6.35 mm) to 3.5 mm)
1 instruction manual
1 storage box