4
Enter Cloogy
"My Cloogy" area at the right top corner of the webpage.
Alternatively, access directly the Cloogy
http://mydata.cloogy.com/login.
5
Insert your username and password. If you do not have a
Cloogy
account register now. Simply follow the instructions
®
on the portal.
6
After entering your installation info it is necessary to activate
your Cloogy
bottom of it.
7
Place 3 AA batteries into the Transmitter – the orange LED
should flash meaning the equipment is working properly.
If you have a single-phase installation, please follow steps
8-13. If it is a three-phase installation, follow steps 14-19.
's website (www.cloogy.com) and access the
®
kit. To do so enter your Hub's ID, located at the
®
's Portal at
®
EN
17