Parkside PWB 30 A1 Traducción Del Manual De Instrucciones Original página 8

GB IE
Content
Introduction ................................. 8
Intended purpose ......................... 8
Extent of the delivery ................... 9
Overview ..................................... 9
Safety information ....................... 9
Technical specifications ................. 9
Initial Operation ........................ 10
Using cleaning agents ................ 10
Cleaning/maintenance/storage .. 10
Waste disposal
and environmental protection .... 10
Spare parts/Accessories ............. 10
Guarantee ................................. 11
Service-Center ............................ 11
Importer .................................... 11
8
Introduction
Congratulations on the purchase of your
new device.
With it, you have chosen a high quality
product.
The operating instructions constitute part
of this product. They contain important
information on safety, use and disposal.
Before using the product, familiarise
yourself with all of the operating and
safety instructions. Use the product only
as described and for the applications
specified.
Keep this manual safely and in the event
that the product is passed on, hand over all
documents to the third party.
Intended purpose
The high-pressure scrubber has been de-
veloped for cleaning flat surfaces around
the house, garden and garage (e.g. roller
shutters, window blinds, balcony cladding,
garden furniture, garage doors, car ports,
glass surfaces, registration plates and vehi-
cle wheel rims).
The equipment is intended for use with the
Parkside pressure washers PHD 100 A1,
PHD 100 B2, PHD 100 C2,
PHD 100 D2, PHD 100 E2, PHD 110 A1,
PHD 135 A1, PHD 150 A1, PHD 150 B2,
PHD 150 C2, PHD 150 D3, PHD 150 E4,
PHD 150 F4.
Operating pressure (Rated pressure) max.
110 bar.
The adapter is suitable for connecting
to other common high pressure cleaners
made by other manufacturers.
The device is strictly not suitable for sensi-
tive surfaces.