cecotec READY WARM 9200 Manual De Instrucciones página 16

ENGLISH
P1/P2/P3: Pre-set heating program
Note: The current day and time must be set in order to activate any of these pre-set programs.
P1: (Monday-Sunday)
Fig. 8.
Non-adjustable program.
00:00 – 01:00: Comfort mode
01:00 – 07:00: ECO mode
07:00 – 00:00: Comfort mode
P2: (Monday-Friday)
Fig. 9.
Non-adjustable program.
00:00 – 01:00: Comfort mode
01:00 – 05:00: ECO mode
05:00 – 09:00: Comfort mode
09:00 – 19:00: Eco mode
19:00 – 00:00: Comfort mode
P2: (Saturday-Sunday)
Fig. 10.
Non-adjustable program.
00:00 – 01:00: Comfort mode
01:00 – 08:00: ECO mode
08:00 – 11:00: Comfort mode
11:00 – 13:00: Eco mode
13:00 – 16:00: Comfort mode
16:00 – 20:00: Eco mode
20:00 – 00:00: Comfort mode
P3: (Monday-Friday)
Fig. 11.
Adjustable program. Example.
00:00 – 01:00: Comfort mode
01:00 – 05:00: ECO mode
05:00 – 09:00: Comfort mode
09:00 – 12:00: Eco mode
12:00 – 16:00: Comfort mode
16:00 – 18:00: Eco mode
18:00 – 00:00: Comfort mode
30 READY WARM 9200 SMART TOWEL WHITE /STEEL / BLACK
P3: (Saturday-Sunday)
Fig. 12.
Adjustable program.
00:00 – 01:00: Comfort mode
01:00 – 05:00: ECO mode
05:00 – 00:00: Comfort mode
P3 adjustable program setting
Under P3 mode, hold down the mode button for 3 seconds to enter day setting.
The screen will display "d1". Press the "+" and "-" buttons to set the desired day, from d1 to d7
(Monday-Sunday).
Press the mode button to confirm and enter hour setting.
The screen will display "00". Press the "+" and "-" buttons to set the desired hour, from 00 to 23.
Press the mode button to set the desired operating mode for each hour.
Repeat these steps until you have completed the schedule of every hour and every day.
Note:
After setting the desired heating mode for the 23 hours, press the "+" button to return to day
setting.
When the screen displays "d7", press the "+" button to finish setting P3.
Timer function
Press the timer button once, the display will show "0 h" blinking.
Press the "+" and "-" buttons to set the desired operating time, from 0 to 9 hours. Wait 3
seconds for settings to be confirmed.
Quick timer setting:
Press the timer button once, the display will show "0 h". Press the timer button once to select
the operating time: 2 h, 4 h or 8 h.
Open window function
Press the mode and "+" buttons simultaneously. The scree will display " F O" and after 3 seconds
will display the target temperature, or if the timer is set, it will display the remaining operating
time. When any of these are displayed, it means the Open window function has been activated.
During operation, if the room temperature drops 2 ºC in 2 minutes, the Open window function
will activate automatically and "F O" will blink on the display. The device will stop heating.
To exit the Open window function:
Press the mode button to activate the heating function again; or wait 20 minutes, and the
device will start operating with the previous settings; or press the On/off button to enter
standby mode. The Open window function will be reset when the device is turned back on.
To turn the Open window function completely off, press the mode and "-" buttons simultaneously.
The display will show "F F" and after 3 seconds will display the target temperature.
Turn the device off and unplug it from the power supply when not in use.
READY WARM 9200 SMART TOWEL WHITE /STEEL / BLACK
ENGLISH
31