DCOOK 8093001 Manual De Instrucciones página 23

towards the closed lock symbol. Then gently press with
your hand to make sure that the shaft is properly attached
to the motor base.
• Place the ingredients in a suitable recipient, such as a bowl,
a cooking recipient or a mixing jug. Do not overfill to avoid
splashes when the motor is running.
• Plug the appliance into the mains.
• Place the head of the shaft in the ingredients before pressing
the switch. This will prevent splashes when the motor is on.
• Switch on the motor by pressing one of the speed switches
(I or Turbo).
• Blend, but remember to take the set breaks. For every one
minute of continuous use, you must break for 10 minutes.
• At speed position I, you can adjust the speed by turning the
upper dial.
CLEANING
• Always unplug the appliance before cleaning
it.
• The motor unit must be cleaned with a damp
cloth.
• Unscrew the shaft of the motor base by
turning it anticlockwise towards the open
lock.
• Wash the
immediately after use. If it is very dirty, it can
be washed with warm washing water.
shaft with
23
running water