Beta 1926SD Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
spare parts list in bold type; they are available as item
1926SDR.
We recommend using the enclosed exploded view as a manual
to disassemble and assemble the tool as well as to identify any
spare parts.
Keep the tool away from dust, humidity and intense cold.
WARRANTY
This tool is manufactured and tested with the greatest care, in
accordance with current safety regulations, and is covered by a
12-month warranty.
We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or
replacing them at our discretion. Should assistance be asked
for during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover any defects due to wear, misuse, or
breakdowns caused by blows and/or falls. In addition, this
warranty will no longer be valid if any changes are made, or if
the tool is tampered with or sent to the customer service in
pieces.
This warranty explicitly excludes any damage to people and/or
things, whether direct or consequential.
HOW TO HAVE THIS WARRANTY VALIDATED
This warranty certificate consists of two parts. Fill in both parts
properly, specifying the following: date of purchase, fiscal
receipt number, item number, serial number, name and
surname or company and address; see that the seller affixes its
stamp complete with company's name and address on both
coupons.
Send coupon "A" to the distributor no later than 15 days from
the date of purchase and keep coupon "B" accompanied with a
copy of the fiscal receipt, to be shown to the seller in the event
of any failure.
DECLARATION OF CONFORMITY TO THE "MACHINE"
DIRECTIVE
BETA UTENSILI SPA
VIA A. VOLTA, 18
20050 SOVICO (MI)
hereby certify, assuming full responsability, that the product:
1/2" REVERSIBLE IMPACT WRENCH
item 1926SD
complies with the following standards, according to the
requirements set by the "Machine Directive":
89/392/EEC and amendments 91/368/EEC and 93/44/EEC.
Place and date of issue
SOVICO (MI) ITALY
January 2000
Name and title of the person in charge
MASSIMO CICERI
(Managing Director)
SPECIFICATIONS
SQUARE DRIVE
BOLT CAPACITY (8.8)
BOLT CAPACITY (12.9)
FREE SPEED
MAXIMUM TORQUE
AIR INLET
WORKING PRESSURE
MAXIMUM WORKING PRESSURE 6,2 Bars
MINIMUM INTERNAL HOSE SIZE
MAXIMUM AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
DEVICE
SOUND PRESSURE
SOUND POWER
VIBRATION LEVEL
we
ITALY
1/2"
M22 34 mm
M18 27 mm
7000 RPM
610 Nm
1/4" taper GAS
6,0 Bars
10 mm
350 l/min
2,6 Kg
190 mm
double hammer
95,9 dB (A)
100 dB (A)
5,99 m/sec
2
(ISO 8662-7)

Publicidad

Tabla de contenido
loading

Tabla de contenido