Descargar Imprimir esta página

Publicidad

Enlaces rápidos

MTPX-RS-EH
SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/
SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS
- Technology: Proximity (125 kHz, EM or HID)
- Read range: 2 to 5 cm
- Output: RS-485
- LED, TAMPER AND BUZZER managed by the host
- Reads EM or HID cards (selectable from software)
- Operates on 9 - 14 VDC, 50mA
- IP65
- Compatibility: WS4 access controller
- Distance reader to controller: 80 meters
- Dimensions (mm): 92x51x27
- Panel Connection: Cable, 0.5 m
- Tecnologia: prossimità (125 kHz, EM o HID)
- Campo di lettura: da 2 a 5 cm
- Uscita: RS-485
- LED, funzioni manomissione e segnale acustico gestiti
dall'host
- Lettura schede EM o HID (selezionabili dal software)
- Alimentazione 9 - 14 VCC, 50 mA
- IP65
- Compatibilità: controller accessi WS4
- Distanza tra lettore e controller: 80 metri
- Dimensions (mm): 92x51x27
- Connessione del pannello: Cavo, 0.5 m
- Technologie: RFID (125 kHz, EM oder HID)
- Leseentfernung: 2 bis 5 cm
- Ausgang: RS-485
- LED-, Sabotageschutz- und Summerkonfiguration über Host
- Liest EM- oder HID-Karten (wählbar über Software)
- Spannungsversorgung: 9 - 14 VDC, 50 mA
- IP 65
- Kompatibilität: WS4-Zutrittscontroller
- Abstand zwischen Leser und Controller: 80 m
- Dimensions (mm): 92x51x27
- Kabelverbindung: Kabel, 0.5 m
MOUNTING/ MONTAGE/ INSTALLAZIONE/ MONTAJE/ MONTAGE/ MONTAGE
5 mm
3 (3 x 30mm)
EM & HID RFID reader with RS-485 output
USER'S MANUAL
EN
IT
DE
1 (M3 x 6mm)
www.xprgroup.com
IT ES DE NL
EN
FR
- Technologie : proximité (125 kHz, EM ou HID)
- Portée de lecture : 2 à 5 cm
- Sortie : RS-485
- LED, anti-sabotage et avertisseur sonore gérés par l'hôte
- Lecture de cartes EM ou HID (à sélectionner dans le
logiciel)
- Fonctionnement sur 9 - 14 VDC, 50 mA
- IP65
- Compatibilité : contrôleur d'accès WS4
- Distance entre lecteur et contrôleur : 80 mètres
- Dimensions (mm): 92x51x27
- Cablâge : 0.5 m de câble
- Tecnología: proximidad (125 kHz, EM o HID)
- Rango de lectura: de 2 a 5 cm
- Salida: RS-485
- LED, control manual y timbre gestionados por el host
- Lee tarjetas EM o HID (seleccionables desde el software)
- Funciona con 9 - 14 V CC, 50 mA
- IP65
- Compatibilidad: controlador de acceso WS4
- Distancia del lector al controlador: 80 metros
- Dimensions (mm): 92x51x27
- Conexión del panel: Cable, 0.5 m
- Technologie: Toetsenbord en nabijheidslezer (125 kHz,
EM of HID)
- Leesbereik: 2 tot 5 cm
- Uitgang: RS-485
- LED, sabotageschakelaar (tamper) en zoemer aangestuurd
door de host
- Leest EM- of HID-kaarten (selecteerbaar uit software)
- Werkt op 9 - 14 VDC, 50 mA
- IP65
- Compatibiliteit: WS4 toegangscontroller
- Afstand tussen lezer en controller: 80 meter
- Dimensions (mm): 92x51x27
- Paneelaansluiting: Kabel, 0.5 m
Bus for
the readers
Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it isused
FR
ES
NL
Reader
Ferrite Core
to reduce the EMI.
1

Publicidad

loading

Resumen de contenidos para xpr MTPX-RS-EH

  • Página 1 MTPX-RS-EH IT ES DE NL EM & HID RFID reader with RS-485 output USER’S MANUAL SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS - Technologie : proximité (125 kHz, EM ou HID) - Technology: Proximity (125 kHz, EM or HID) - Portée de lecture : 2 à 5 cm...
  • Página 2 Conexión entre el lector y el controlador WS4 Verbindung des Lesers mit WS4-Controller Aansluiting lezer op controller WS4 80 meters MTPX-RS-EH Connection two readers per RS-485 line Raccordement de deux lecteurs par ligne RS-485 Connessione di due lettori per linea RS-485 Conexión de dos lectores por cada línea RS-485...
  • Página 3 The readers for Doors 1.0 and 2.0 must be at address 0 and those for Doors 1.1 and 2.1 at address 1. For doors equipped with 2 readers, one must be at address 0 and the other at address 1. Recommended cabling: Multiconductor cable 2 twisted pair with shielding.
  • Página 4 SOFTWARE SETTINGS/ PARAMÈTRES DU LOGICIEI/ IMPOSTAZIONI SOFTWARE/ AJUSTES DE SOFTWARE/ SOFTWAREEINSTELLUNGEN/ SOFTWARE-INSTELLINGEN Go to Doors, select the Reader(fig.2) and then select 125 kHz(EM4100) or 125 kHZ(HID) for Card. (fig.3) While off line, red LED blinks fast and buzzer beeps continuously. Once communication is established, the red LED and the buzzer stop.