Changing Fuse; Using The Ac Adaptor - JVC KV-PX501 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 88

Changing Fuse

Replace only with same type and ratings of fuse:FAST ACTING TYPE /φ6.35*32 /
250V / 1.5A
1. Turn right the front plastic cover to loosen it but leaves the positive metal part in it.
2. Take out the fuse (Fuse: FAST ACTING TYPE /φ6.35*32/250V/1.5A)
3. Replace the fuse (Fuse: FAST ACTING TYPE /φ6.35*32/250V/1.5A)
4. Fasten the front plastic cover again. Then finished (Do not let the positive metal
part dropped during this process)

Using the AC Adaptor

Before using the device for the first time, we strongly suggest you use a fully
charged battery.
1.
Insert the USB connector into the unit.
2.
Plug the adaptor into a power outlet.
The USB connector is used for
battery charging only
Using the TMC Antenna
Insert the TMC Antenna (1) into the unit.
16
by AC Adaptor.
.

Publicidad

Tabla de contenido
loading

Tabla de contenido