NGS electonics GLITTER Manual Del Usuario página 6

USER'S MANUAL
CHARGING THE BLUETOOTH
SPEAKER
1. Connect the Bluetooth speaker's micro USB socket with
the computer's USB port through USB cable.
2. The charging LED will turn ON in red light; the rechargeable
battery is in charging.
3. The charging LED red light will turn OFF when the
rechargeable battery is fully charged.
4. Disconnect the USB cable.
6
BLUETOOTH SPEAKER PAIRING /
RECONNECTING
1. Move the switch to the ON position, a message sound;
"beep" will announce from speaker and the mode LED
will blinking in blue; the device is turned ON and goes into
searching / paring / reconnect mode for pair.
2. Now, turn ON the Bluetooth function on your mobile
phone.
3. Search for "NGS ROLLER FUN" and select it to pair (for first
time pairing or pairing a new mobile device).
4. The Bluetooth speaker will be reconnecting automatically
if your mobile phone has been paired (Depend on the
of mobile phone's type and configuration, manual
reconnection may require on some devices).
5. If pairing is successful, a message sound; "beep" will
announce from speaker and the mode LED light will keep
turn on.