BeeWi BBS010 Guia Del Usuario página 8

8
2.7. multipoint
The multipoint function allows a simultaneous connection to 2 mobile pho-
nes. In default setting of the speaker's multipoint function is disabled.
- To enable multipoint function: in standby mode, press and hold "V+"
button for 3 seconds until a beep is heard. If 2 mobile phones are already
paired to the speaker, they will connect automatically when powering on
the speaker.
- To disable multipoint function: in standby mode, press and hold "V-"
button for 3 seconds until a beep is heard. The speaker will turn off multi-
point function and power off automatically. When powering on again, the
speaker will only connect to the last connected Bluetooth device.
2.8. Function matrix
Feature
Power On
Power Off
Pairing
Answer a call
Hang up a call
Reject incoming call
Voice dial / Cancel
Voice Dial
Last number redial
Switch active calls*
Hang up call 1 and
answer call 2*
Reject call 2*
Key Conditions
Powered off
Powered on
Powered off
Incoming Call
Talking
Incoming Call
Standby mode
Standby mode
2 Calls in
process
2 Calls in process
2 Calls in process
Operation
Long press 3 seconds
Long press 3 seconds
Long press 6 seconds
Short press
Short press
Long press 3 seconds
Short press
Short press twice
Short press twice
Short press
Long press 3 seconds
ENGLISH