Publicidad
RECALLING A PRESET/SWITCHING
BETWEEN PRESETS
Once you've created a couple of presets you can
switch between your personalized configurations
very quickly. This is as simple as it can be: simply
hold the Shift button and press one of the pads.
In the picture above, the combination of the Shift
button and Pad 2 will select Preset #2 from the
COMMANDKEY preset memory locations.
To switch from Preset #2 to Preset #1, hold Shift
again and press Pad 1 instead.
Changing the Global output MIDI channel lets
you easily switch between multiple instruments
or tracks in your DAW. This is easily achieved by
holding the Shift button and pressing one of the
keyboard's keys.
The numbers above the first 16 keys on the
keyboard correspond to the 16 possible MIDI
channel numbers, and indicate which key you
should use in conjunction with the Shift button
to change the Global MIDI Channel setting. For
example, if you want to switch the Global channel
of the COMMANDKEY to MIDI Channel 2, hold the
Shift button and press the first C# key:
Then when it's time to switch to channel 1, for
example, use the same technique but press a
different key: in that case, you would hold the Shift
button and press the first C key on the keyboard.
13
Publicidad
