Publicidad
SETUP
MINIMUM COMPUTER REQUIREMENTS
Windows
Pentium 3 800 MHz or higher
(CPU requirement may be higher for laptops)
256MB RAM
Direct X 9.0b or higher
Windows XP (SP2) or higher
(Windows Me, NT or 2000 not supported)
USING COMMANDKEY25
WITH SOFTWARE
CREATING MIDI PRESETS WITH THE MIDI
CONTROL CENTRE
Thanks to the MIDI Control Centre software, it's
possible to configure the COMMANDKEY25
to work with practically any device or software
capable of responding to MIDI information.
To summarize, here are some examples of what you
can do with a COMMANDKEY preset:
• Assign pads to send MIDI Machine Control
commands (MMC).
• Use the pads or the pedal to transmit MIDI notes.
• Switch between two values of any MIDI CC# by
playing a pad.
• Assign an encoder to control any MIDI CC# and
define its operational range.
Macintosh G3*800/G4*733 MHz or higher
(CPU requirement may be higher for laptops)
OS X 10.3.9 with 256MB RAM
OS X 10.4.2 or greater with 512MB RAM
*G3/G4 accelerator cards are not supported
• Send Aftertouch messages from the Mod strip,
set its min/max limits, and select 'return to zero'
or 'hold' behaviour.
• Save the entire set of altered controls to one of
the COMMANDKEY25's eight preset locations.
• Define another seven sets of parameter
assignments and save each one to a different
memory location.
• Recall any of the eight personalized presets
easily and immediately.
8
Mac OS
Publicidad
