Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Subzero SZPA-P88
Resumen de contenidos para Subzero SZPA-P88
- Página 1 PORTABLE BLUETOOTH PA SYSTEM USER MANUAL SZPA-P88 / SZPA-P810...
- Página 2 PORTABLE BLUETOOTH PA SYSTEM...
- Página 3 WARNING! Non esporre il prodotto a perdite di liquido o a spruzzi. Non appoggiare nessun oggetto contenente acqua sul prodotto. Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel Non esporre il prodotto a fuoco, candele o oggetti simili. Do not place the product in a location near a heat source such as a radiator, or in an area subject to Assicurarsi la circolazione dell’aria e non ostruire le ventole, se presenti, per evitare il surriscaldamento.
- Página 4 15” Active Floor Monitor. To help you get the most out of your new product, please read this manual carefully. The SZPA-P88/P810 is a live performance PA system with a removable 8-channel mixer, which includes a powerful class D amplifier.
-
Página 5: Controls & Functions
CONTROLS & FUNCTIONS 1. AC IN JACK NOTE: Connect the included power cord here. When L (MONO) output signal is inserted alone without R output signal, the L (MONO) output CAUTION! signal is the sum of both left and right signals. Be sure to use the included power cord. - Página 6 9. TRS/RCA STEREO CHANNEL INPUT 14. FX CONTROL CONNECTOR (CH 5/6) Adjust this knob to set the level of the Reverb. Input the left and right channels of a stereo signal into the respective odd and even 15. MEDIA PLAYER CONTROLS channels of the mixer.
-
Página 7: Power Indicator
19. MONITOR OUT CONTROL Determines the signal level output from the MONITOR OUT connectors. NOTE: The MASTER LEVEL control does not affect the signal via the MONITOR OUT control. 20. FX CONTROL Delay controls the amount of effect sent to each channel. - Página 8 REMOVING THE MIXER 1. Please ensure power to the mixer has been NOTE: turned off. The mixer can also be used when installed in the speaker. 2. Use a screwdriver to turn the screw on the mixer from LOCK to OPEN until it clicks. When you install the mixer into the speaker, make sure to match the indentations on the speaker 3.
-
Página 9: Quick Setup
QUICK SETUP 1. Connect the included speakers to the mixer. 8. Applying Effects (optional) • Increase the DELAY or ECHO • Ensure the mixer is turned off • Insert one cable into output L and connect to master control in the FX one speaker. - Página 10 APPLICATION The SZPA-P88/P810 can be used in a wide If you have a powered speaker, you can connect variety of sound reinforcement applications, it to the MONITOR OUT jack for monitoring your from a full-band performance onstage to solo vocals. For optimum results in band performance street performances.
- Página 11 TROUBLESHOOTING Mixer and Amplifier Will Not Turn On Output Level is Low • Is the included power cord correctly connected • Are the LEVEL controls of all relevant channels to a power outlet? and/or the MASTER LEVEL control set to appropriate levels? Amplifier Turns Off Suddenly •...
- Página 12 SPECIFICATIONS MIXER SZPA-P88 SZPA-P810 MONO inputs (4) 2x LINE/MIC IN (XLR) + 2x LINE MIC IN (COMBO) (4) 2x LINE/MIC IN (XLRJ + 2x LINE/MIC IN (COMBO) STEREO inputs (2) 1x LINE IN (2x JACK)+ 1x LINE IN (1 x AUX JACK...
- Página 14 If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com...