Before Your First Treatment - Silk’n BellaVisage H2111 Manual Del Usuario

7.

Before your first treatment

To use your Silk'n BellaVisage, do these steps:
1. Remove the device and other components from the box.
Plug the adapter cable (#5 in the diagram) into the device
2.
socket and plug the adapter into an electrical outlet. All energy
level indicator lights cycle repeatedly one aft er the other.
3. Understand how to set energy levels and become familiar
with the 6 recommended treatment areas (see the rest of this
section).
7.1 Energy levels
Silk'n BellaVisage has 5 levels of energy represented by 5 indicator
lights (#4 in the diagram). The selected energy level determines the
intensity of energy delivered to your skin.
To set an energy level:
Press the start button (#3 in the diagram) repeatedly to move
1.
between energies, from 1 to 5 and back to 1 again. When the
desired energy is set, the energy level indicator lights will
indicate the level chosen.
To return to standby mode, long press the start button. All five
2.
lights will cycle continuously.
To change to a different energy level during a treatment:
Press the start button again. This will change energy level
U
and allow you to treat the same or different areas with different
energy levels according to your needs.
If the energy level feels too hot or uncomfortable, try moving
U
the device more quickly. If the energy level is still too high, go
back to a lower level.
Only change energy levels when the device is not in contact
C
with the skin.
7
EN