PEERLESS ACCSH300 Instrucciones Para La Instalación Y El Ensamblaje página 7

4
Attach shelf bracket (J) and glass support bracket (G) to shelf attachment clamp (D) using two
M5 x 18mm screws (E) and washers (I) shown in fi gure 4.1 using 4mm allen wrench (M). Adjust
the level of the shelf bracket (J) to desired height then tighten knob to secure.
NOTE: Position ONE shelf bracket assembly per column only.
Place glass shelf (K) onto shelf bracket (J) and secure with M5 x 12mm screw (F) as shown in
fi gure 4.2 using 2.5mm allen wrench (N). Repeat for other shelf assembly.
NOTE: Overtightening the screws may cause damage to glass shelf (K).
K
F
KNOB
J
D
J
I
E
G
fi g. 4.2
fi g. 4.1
7 of 27
ISSUED: 01-21-11 SHEET #: 083-9014-1