Dimensions (Mm); Charging The Battery - Cleco 936400PT Manual De Instrucciones

2

Dimensions (mm)

1.7 Storage
WARNING!
Danger of explosion from short circuit
Do not bring any electrically conducting objects such as paper clips, coins, keys, nails or screws in

contact with the battery contacts.
When storing the battery outside the tool or the battery, vapours may be emitted. Provide for fresh air

and seek medical help in case of complaints. The vapours can irritate the respiratory system.
It is vital that battery is recharged within the specified period in order to prevent total discharge and destruc-
!
ATTENTION
tion.
Status
Default settings
Fully charged
Uncharged
2 Dimensions (mm)
3

Charging the battery

Battery is only partly charged upon delivery.
It must be fully charged before initial use.

WARNING!
Non-matching batteries may cause the battery to overheat or damaged.
Only use original Apex Tool Group battery chargers

as they are optimally matched to the battery.
20
EN
Max. period Storage temperature
days
100
360 -20 °C to +45 °C (-4 °F to + 113 °F)
60
P2070BA/EN 2015-06
Relative humidity
0 ... 80 %, not with dew
2070b_1_5en_bedingt.fm, 24.06.2015