BaByliss CURL SECRET C903PE Manual Del Usuario página 7

Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair no wider than 3 cm. Ensure the section is
thoroughly combed through.
• Bring the appliance close to the hair and position it in the right
direction: the cavity formed by the cylinder downwards (FIG.1 and 2)
and facing the head. (FIG. 3 and 4).
• With your free hand, take hold of the tip of the section of hair and place
it on the opening, in the funnel situated between the two handles
(FIG.5).
Note: To prevent the appliance from blocking, ensure that you have no
hair lying across the edges.
Also ensure that you are not pulling your hair before activating the
handles (FIG. 6 and 7).
If these precautions are not respected, you risk catching your hair
in the appliance.
• Once the section of hair is in place, close the handles to allow the hair to
automatically enter into the appliance.
• Keep the handles closed until the beeping stops (FIG.8).
• Gently release the hair from the appliance by opening the handles
(FIG.9). Don't pull on the appliance to free the hair. If you do this you
will ruin the curl effect.
• Allow your hair to cool before handling or combing it.
• Repeat all over the head until you have the number of curls you would
like.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
Protection system
The appliance is fitted with a protection system. If hair becomes tangled,
the appliance emits an audible signal, it blocks and stops heating.
If this occurs, release the handles, ensuring that the appliance and
section of hair are correctly positioned, then simply re-close the handles
to deactivate the security system and re-start the appliance.
Sleep mode
If the appliance is not in use for more than 20 minutes, the temperature
will automatically reduce to 170°C. If you wish to continue using the
appliance after this time, simply close then release the handles and the
appliance will return to the temperature setting previously selected.
16_C903PE-C904PE-C905PE_IB.indd 7
7
06/06/2016 9:54 AM