Infrico PG-60PV Manual De Instrucciones Para La Instalación, El Uso Y Mantenimiento página 9

G AS, PRESSURES AND D EFINED CATEGORIES
INSTALLATION AND ADJ USTEMENT INSTRUCTIONS FOR THE
PR E I N ST ALL AT IO N PR E C AUT IO N S
 These instructions are only valid if the country symbol appears on the appliance. If the symbol
does not appear on the appliance, it is necessary to refer to the technical instructions that
contain the necessary indications to adapt the appliance to the conditions of use of the country.
 This operation must be undertaken by personnel authorized to do so by the regulations in force
regarding or by those regulations in force in each European Community country.
 The appliance must only be installed in places with sufficient ventilation to stop the
accumulation of inadmissible concentrations of noxious substances in the area where they are
installed.
 The appliances must only be installed on non-flammable surfaces.
 The appliance must be installed at least 1.5 m distant from any other flammable material.
 The parts that have been protected by the manufacturer MUST NOT BE MANIPULATED by
the installer and/or the user.
 Check the gas type as indicated on the appliance characteristics plate and to which the
appliance has been calibrated by the manufacturer must correspond to the gas to be used.
 The appliance must be checked before installation and verify that it has not suffered any
damage or adjustments altered during the shipment.
 The appliance must be installed at least 200 mm from any lateral back wall to protect them
from the temperatures close to 80º that the appliance sides and back can reach.
 The cooking plate could arrive to 300ºC degrees maximum.
 The appliance doesn't need any special fix.
G AS S UP P LY AN D T H E A P P L I AN C E G AS T Y P E ID E NT IFI C AT IO N
In the appliance technical data sheet can be found he following technical dates to carry out
installation according to the destined country:
INSTALLER
9