To reduce the risks associated with hazardous Pressure:
• 2-Quart Cup must not exceed 50 psi.
• The 2-Quart Cup comes with a factory installed relief valve. Do not attempt to
replace relief valve with a plug. Pull on relief valve ring to insure that it is working
properly. Replace a faulty relief valve immediately.
• Before opening pressurized containers, disconnect all supply air and relieve
pressure by opening relief valve or screw.
To reduce the risks associated with lifting and handling:
• Always follow proper lifting and handling practices when moving system
components.
To reduce the risks associated with hazardous air pressure:
• Maintain spray equipment per 3M care and cleaning instructions in the applicable
owner's manual.
• Ensure air input pressure and all applicator system regulators are properly
adjusted prior to each use.
• Always follow required air pressure relief procedures for relieving air pressure
from the unit.
To reduce the risks associated with environmental contamination:
• Spray materials, solvents, other cleaning materials and electronic components
must be disposed of per federal, state and local regulations.
WARNING
CAUTION
4