Troubleshooting; Warranty Registration - Allied Telesyn AT-BSTACK1 Guía De Instalación Rápida

Troubleshooting

If you experience any problems with the module, check the following items
before contacting Allied Telesyn Technical Support:
Ensure that all the switches in the stack are powered up.
Ensure that the devices attached to the stack are powered up and
operating correctly.
Ensure that the stack modules are properly seated in their slots.
Check the connectors on both ends of the stack cable to be sure they
are properly engaged. Tighten the thumb screws on the cable
connectors to ensure a good connection.

Warranty Registration

When you have finished installing the module, register your product by
completing the enclosed warranty card and sending it in, or by visiting our
web site at www.alliedtelesyn.com/forms/warranty.htm and completing
the on-line registration form.
AT-BSTACK1 Quick Install Guide
7