Connection Diagrams - Axis Q1615-E Mk II Guia De Instalacion

AXIS Q1615-E Mk II Network Camera
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Function Button
The function button has multiple functions:
• Levelling assistant – This function helps to ensure the camera is level. Press the button
for about 3 seconds to start the levelling assistant and press again to stop the leveling
assistant. The status LED and buzzer signal assist levelling of the camera, see Status LED
Behavior and Buzzer Signal for Levelling Assistant on page 13. The camera is level when
the buzzer beeps continuously.
• Focus assistant – This function is used for enabling the Focus Assistant. To enable
the focus assistant, press and very quickly release the button. Press again to stop the
focus assistant.

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output
16