Proper Use; General Information; General Safety Instructions - REV Ritter ESFL-6610-ST Manual De Instrucciones

LED Arbeitsleuchte FLARE
Assembly and operating instructions
Introduction
Dear Customer,
We'd like to thank you for purchasing our product. Please read the following operating instructions
thoroughly before using this product for the first time and keep it handy for future reference (S1).
Please check the product before use for any damage.

Proper Use

• The product conforms to the appropriate European CE directives (S2).
• This product conforms to the appropriate European safety standards.
• The product is hose-proof, IP65 and suitable for outdoor use.
• The product is intended exclusively for household use or similar purposes. It must not be used
for commercial purposes!
• The product may only be used only for the purpose for which it is intended, in accordance with
this user manual!
• The product is not suitable for rough use (e.g. construction sites)!
• The product is not intended for use by persons (including children) whose physical, sensory or
mental abilities are limited or who lack experience and knowledge! These persons may only use
the product if they are supervised by a person responsible for their safety, or if they have been
inducted into how to use the product! The supervision and use of this product must be carried
out by a responsible person!
• Make sure that this product is kept out of the reach of children or unauthorised persons.

General Information

• Handle this product carefully. It can be damaged by shocks, blows or by being dropped, even
from a low height!
• Disconnect the product's mains power plug in the event of a fault during operation.
• Only use the supplied original parts!
• Do not use additional components!
• This product has no replaceable parts. Do not attempt to open or repair this product!

General Safety Instructions

• Please observe the technical specifications!
• Please follow this instruction manual and keep it in a safe place!
• Please pass on this instruction manual to a subsequent owner!
• Not to be used by children!
• Do not operate a defective product!
• Never look directly into the LED light source! The light spectrum transmitted may contain blue
components (S3).
• Always allow to cool down sufficiently and for cleaning purposes disconnect the luminaire from
the power supply and secure the electric circuit against being switched on again.
• Must not be used in areas that represent an explosion hazard (e.g. carpentry workshop,
paintshop, or similar)!
• Do not use in the immediate vicinity of flammable materials!
GB
9