Troubleshooting - Remington HT5024PHT Manual Del Propietário

5

troubleshooting

WARNING: Unplug trimmer from power source before servicing. Severe
injury or death could occur from fire, electrical shock, or body contact with
moving blades.
Note: For additional help, visit our
t e c h ni c al s er v ic e we b s i te a t
www.desatech.com.
OBSERVED FAULT
Motor does not run when you squeeze
trigger switches
Motor runs, but cutting blades do not
move
Trimmer smokes during operation
Technical Service
You may have further questions about
assembling, operating, or maintain-
ing this hedge trimmer. If so, you can
visit our Technical Service web site at
www.desatech.com or contact our
Technical Service Department at 1-800-
858-8501 (English only). You may also
write to:
DESA Power Tools
ATTN: Technical Service Specialty
Products
P.O. Box 90004
Bowling Green, KY 42102-9004
120134
Remington BRAnD DuAl-Action electRic HeDge tRimmeR |
POSSIBLE CAUSE
1. Both trigger switches are not fully
depressed at the same time
2. Rear handle is not locked into one of
the 5 preset positions
3. Extension cord connection is loose
4. Household circuit breaker is tripped
or open line fuse
Trimmer damaged. Do not use trimmer
Trimmer damaged. Do not use trimmer
When contacting DESA Power Tools,
have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (include copy of
receipt for written requests)
REMEDY
1. Fully squeeze both front and rear
trigger switches (see Basic Trimmer
Operation, page 5)
2. Verify rear handle is locked into one
of the 5 preset positions
3. Check cord connections
4. Check circuit breaker or line fuse
Contact DESA Power Tools if still under
warranty
Contact DESA Power Tools if still under
warranty