Publicidad
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect fi nish, avoid the use of chemicals and household cleaners.
les pieces de fi xation peuvent se desserrer apres un certain temps. Verifi ez de temps a autre
pour vous assurer que tous les raccords sont serrés.
Essuyez avec un chiff on doux et sec. Pour eviter d'endommager la fi nition, n'utilisez pas de
produits chimiques ni de nettoyants ménagers.
Los herrajes se peuden afl ojar con el tiempo. Revise periodicamente qur todas las
conexiones estén bien apretadas.
Use un trapo suave y seco para limpiar. Para proteger el acabado, no utilice limpiadores
domésticos ni productos químicos.
NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching furniture to wall with anti-tip kits.
1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximately 1" below the top on the back of the piece of furniture.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the piece of furniture's top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten the piece of furniture snug against wall.
2399822/2399814/2399871 - 06.04.10
large screw
hudson 3 drawer dresser
commode à 3 tiroirs hudson
cómoda hudson de 3 cajones
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
small screw
Page 3 of 5
Publicidad
