Using The Remote Control; On/Off Button - Impecca IWA06-QR15 Manual De Usuario

REMOTE CONTROL

USING THE REMOTE CONTROL

ON/OFF BUTTON

Press the ON/OFF button to power the unit on or off.
FAN / BUTTONS
Press the respective button to increase () or decrease ( ) fan speed.
AUTO BUTTON
Press this button for an automatically adjusting fan speed based on ambient room tem-
perature.
Note: To exit the AUTO function, press the FAN  button.
TEMPERATURE / BUTTONS
Set the desired room temperature by pressing the appropriate button. Temperature
changes are displayed in 1° increments in the range of 64°F (18°C) and 86°F (30°C)
Note: Temperature cannot be set when using the fan mode.
MODE BUTTON
Cycle between cooling mode, fan mode, and energy saving cooling mode.
1. Power ON/OFF button
2. Fan speed increase ()/decrease ()
3. Temperature increase ()/decrease()
4. Mode selector
5. Auto fan speed
6. Delay (Timer) button
7. Delay increase ()/decrease ()
–9–