ASROCK H310CM-HDVP Manual De Instrucciones página 20

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.1, No. 14)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 9)
(SATA3_1:
see p.1, No. 8)
(SATA3_2:
see p.1, No. 7)
(SATA3_3:
see p.1, No. 6)
USB 2.0 Header
(9-pin USB_4_5)
(see p.1, No. 13)
USB 3.1 Gen1 Header
(19-pin USB_2_3)
(see p.1, No. 5)
18
SPEAKER
DUMMY
DUMMY
+5V
1
SIGNAL
GND
DUMMY
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_P3_SSRX-
IntA_P2_SSRX- IntA_P3_SSRX+
IntA_P2_SSRX+ GND
IntA_P3_SSTX-
GND
IntA_P2_SSTX-
IntA_P3_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P3_D-
IntA_P2_D- IntA_P3_D+
IntA_P2_D+ ID
1
Please connect the
chassis power LED and
the chassis speaker to this
header.
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_3 will be disabled.
There is one USB
2.0 header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.1 Gen1 header can
support two ports.