Environmental Protection - BGS technic BGS 8853 Manual Del Usuario

HEAD ANGLE ADJUSTMENT
1. Loosen the clamping screw
2. Adjust the desired angle
3. Tighten the clamping screw.
REPLACING GRINDING BELT
1. Compress the tensioning unit (Fig.1)
2. Place the grinding belt onto the drive wheel (Fig.2)
3. Place the grinding belt onto the tensioning pulley (Fig.3)
4. Unlock the tensioning unit by pressing the front part of
the locking jack (Fig.4)

ENVIRONMENTAL PROTECTION

Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. Contact your local
solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed