Application; Specifications; Change Of Batteries; Laser Lines - Instrumax 3D GREEN Manual De Instrucciones

Congratulations on the purchase of laser level INSTRU-
MAX 3D GREEN!

Application

Cross Line Laser projects visible laser planes. It is used for
determination height, making horizontal and vertical planes.

Specifications

Laser 1H 360° / 2V 360°
Light sources 516 nm
Laser safety class Class 2, <1mW
Accuracy ±3 mm/10 m
Self-leveling range ±4°
Operating range
without/with receiver 40/70 m
Power source 4xАА batteries/Charger
Tripod thread 5/8"
Operating temperature -10°C +40°C
Weight 720 g

Change of batteries

Open battery compartment. Insert batteries. Take care to
correct polarity. Close battery compartment.
ATTENTION: Take out batteries If you are not going to use
the tool for a long time.
Charger
It is possible to use charger to operate with the instrument.
Use charger for rechargeable batteries. Connect the charger
to the hole that is located on the housing of the instrument.
Then connect it to the main power. The instrument is in work-
ing condition and rechargeable batteries are charging.
WARNING: Never use charger for ordinary batteries. Do
not leave the instrument unattended while using charger.
Parameters of the charger must correspond to the param-
eters of domestic electricity. Output voltage must be no
more than 5V.
1

Laser lines

2

Features

1. Vertical laser window
3
3D GREEN