Mirabelle MIRTSEZ201 Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
FOR THE MIRABELLE TOILET SEATS
WITH EASY CLEAN
Figure A
INSTALLATION INSTRUCTIONS
FOR THE MIRABELLE TOILET SEATS
WITH EASY CLEAN
(FIG.2)
Figure B
(FIG.5)
INSTALLATION
1. Hardware comes pre-assembled with the bolt through the hinge plate and the U-bar and nut on the bolt. (FIG.1)
2. Rotate the U-Bar vertically and insert through the seat bolt holes in the toilet bowl. Once placed through the bolt holes, gently
shake the post plate to allow the U-Bar to rotate to a horizontal position. (FIG.2)
3. Raise and hold the post plate with your hand until the U-Bar is firmly making contact with the underside of the toilet bowl.
(FIG.3)
4. Gently tighten the bolts then push the seat on to the hinge pins and check if the position of the seat is correctly lined up with
the bowl.
5. Adjust if needed by rotating the washer plate or sliding forward/backwards to line the seat up with the front of the bowl. (FIG.4)
6. When the seat fits correctly, remove the seat by pressing the button and lifting the seat upwards. Tighten the bolts with a
screw driver. (FIG 5)
7. Cover the post plates with the hinge covers provided. (FIG.6)
8. Attach the seat onto the toilet bowl by sliding the hinge pins into the hinge body of the seat. The hinge pins will click into place.
(FIG.7)
(FIG.1)
Figure C
Figure B
(FIG.3)
Figure C
(FIG.6)
Figure D
Figure D
1
INSTALLATION INSTRUCTIONS
MIRTSEZ201
FOR THE MIRABELLE TOILET SEATS
Installation Instructions
WITH EASY CLEAN
Instructions d'installationt
Instrucciones de instalación
Figure A
Figure C
Post Plate
Washer
Bolt
U-bar
Nut
(FIG.4)
Figure B
Figure D
(FIG.7)
www.mirabelleproducts.com
© 2018 Ferguson Enterprises, Inc. 0518 838136
F
W
Figu