MAXIMUS DLS36-06C27D1E-WH-F1 Manual De Instrucciones página 4

For 5" housings
Step 4 (Fig. 4)
Remove existing trim and CFL or incandescent bulbs.
To install in 5" housings, loosen the screws on each side of the
friction clips with a Phillips screwdriver.
Step 5 (Fig. 5)
Move friction clips to the 5" holes. Tighten the screws.
Step 6 (Fig. 1)
Screw adapter (B) into socket in recessed housing.
Step 7(Fig. 2a)
Plug base cable connector into lamp (A).
Step 8 (Fig. 2b)
Carefully route wires into fixture. Push retrofit into recessed housing
until the trim is flush with the ceiling surface.
Fig. 4
Fig. 5
4