Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Hyundai Elantra 2014-2016
KIT FEATURES
• ISO DDIN radio provision
• Painted black to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 • HYBL-04
Antenna Adapter: • Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
METRA. The World's best kits.
Installation instructions for part 95-7362B
95-7362B
metraonline.com
™
Dash Disassembly
– Hyundai Elantra 2014-2016 ................................. 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Metra 95-7362B
Resumen de contenidos para Metra 95-7362B
- Página 1 Installation instructions for part 95-7362B Hyundai Elantra 2014-2016 95-7362B Dash Disassembly – Hyundai Elantra 2014-2016 ......... 2 Kit Assembly – ISO DDIN radio provision ........3 KIT FEATURES • ISO DDIN radio provision • Painted black to match factory finish KIT COMPONENTS •...
-
Página 2: Dash Disassembly
95-7362B Dash Disassembly 1. Remove trim panels from each side of center console. (Figure A) 2. Remove (4) Phillips screws from radio trim panel. Gently pry radio trim panel from dash. (Figure B) 3. Remove (4) Phillips screws securing radio chassis to sub dash. -
Página 3: Kit Assembly
(Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount the assembly into the sub dash. (Figure B). 4. Reassemble the dash in the... - Página 4 Installation instructions for part 95-7362B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
-
Página 5: Componentes Del Kit
Instrucciones de instalación para la pieza 95-7362B Hyundai Elantra 2014-2016 95-7362B Desmontaje del tablero – Hyundai Elantra 2014-2016 ......... 2 Ensamble del kit – Provisión de radio ISO DDIN ........3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN •... -
Página 6: Desmontaje Del Tablero
95-7362B Desmontaje del tablero 1. Quite los paneles de la moldura desde cada lado de la consola central. (Figura A) 2. Quite los (4) tornillos Phillips del panel de la moldura del radio. Quite con cuidado el panel de la moldura del radio del tablero. -
Página 7: Ensamble Del Kit
(Figura A) 2. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 3. Monte el ensamble en el sub tablero. - Página 8 Instrucciones de instalación para la pieza 95-7362B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...