1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7361S
  6. Instrucciones de instalación

Metra 95-7361S Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
Installation Instructions for 95-7361S
Hyundai Santa Fe
KIT FEATURES
• ISO DDIN radio provision
• Painted silver
KIT COMPONENTS
• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7303
Antenna Adapter: • 40-KI11
METRA. The World's best kits.
2010-2012
(with factory NAV)
95-7361S
C
1-800-221-0932
™
Dash Disassembly
– Hyundai Santa Fe (w/factory NAV) 2010-2012 ....... 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
Table of Contents

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 95-7361S

Resumen de contenidos para Metra 95-7361S

  • Página 1 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-7303 NOTE: Refer to the instructions included with the Antenna Adapter: • 40-KI11 aftermarket radio. METRA. The World’s best kits. 1-800-221-0932 metraonline.com ™ © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION...

  • Página 2: Dash Disassembly

    A/C vents. (Figure D) 5. Remove (4) Phillips screws securing the radio. Unplug and remove radio. 6. Remove the (3) switches from the factory radio and snap them into the Metra radio housing. Continue to kit assembly (Figure C) (Figure D)

  • Página 3: Kit Assembly

    2. Slide the radio into the assembly and secure with screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from (Figure A) (Figure B) Metra and/or AXXESS.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits. 1-800-221-0932 metraonline.com ™ © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION...

  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7361S AplicAciones Indice Hyundai Santa Fe 2010-2012 (con NAV de fábrica) 95-7361S Desmontaje del tablero – Hyundai Santa Fe (con NAV de fábrica) 2010-2012 ..2 Ensamble del kit – Provisión de radio ISO DDIN ........3 cArActerísticAs del kit...

  • Página 6: Desmontaje Del Tablero

    5. Retire los (4) tornillos Phillips que sostienen el radio. Desconecte y quite el radio. 6. Retire los (3) interruptores del radio de fábrica y colóquelos a presión en la carcasa del radio Metra. (Figura C) (Figura D) Continúe con el ensamble del kit...

  • Página 7: Ensamble Del Kit

    (Figura B) 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. ..Metra recomienda (Figura A) (Figura B) el uso de los adaptadores adecuados de acoplamiento de Metra y/o AXXESS.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7361S EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido