RST Kooper Club OP-AWCLB-KPR Manual De Instrucciones Y Ensamble página 3

ATTACH BACK AND SEAT TO LEG FRAME
1. Attach back (A) to the leg frame (C) using screws (D), and allen wrench (I).
2. Attach seat (B) to the leg frame (C) using bolts (E), barrel nuts (F), and allen wrench (I).
Step 1.
NOTE: Use bolt (G) as an extension to insert barrel nut (F) into the hole found on seat
(B). Screw the bolt into the top of the barrel nut. Once bolt (E) is secured through the
frame and into the barrel nut (F), remove bolt (G) from barrel nut (F).
2