Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Version 1.0
Published March 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Publicidad

loading

Resumen de contenidos para ASROCK H110M-DS/Hyper

  • Página 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Página 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Página 3 H110M-DS/Hyper Motherboard Layout PCI Express 3.0 CPU_FAN1 ATX12V1 USB 3.0 T: USB1 B: USB2 Front USB 3.0 USB 2.0 Top: CHA_FAN1 T: USB3 RJ-45 B: USB4 H110M-DS/Hyper RoHS PCIE1 CMOS Intel Battery H110 PCIE2 HD_AUDIO1 USB_5_6 BIOS CLRMOS1 PANEL1 COM1...
  • Página 4 No. Description ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) ATX Power Connector (ATXPWR1) USB 3.0 Header (USB_11_12) USB 2.0 Header (USB_9_10) Chassis Fan Connector (CHA_FAN2) SATA3 Connector (SATA3_0) SATA3 Connector (SATA3_1) SATA3 Connector (SATA3_2) SATA3 Connector (SATA3_3) System Panel Header (PANEL1)
  • Página 5 H110M-DS/Hyper I/O Panel No. Description No. Description PS/2 Mouse Port USB 2.0 Ports (USB_34)*** LAN RJ-45 Port* USB 3.0 Ports (USB_12)*** Line In (Light Blue)** DVI-D Port Front Speaker (Lime)** PS/2 Keyboard Port Microphone (Pink)** * There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
  • Página 6 ** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi- channel audio feature through the audio driver. Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager. Function of the Audio Ports in 7.1-channel Configuration: Port Function...
  • Página 7 ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Página 8 • Supports DDR4 2133 non-ECC, un-buffered memory • Supports ECC UDIMM memory modules (operate in non- ECC mode) * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) • Max. capacity of system memory: 32GB • Supports Intel® Extreme Memory Profile (XMP) 2.0 • 1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)*...
  • Página 9 • 1 x PS/2 Mouse Port Rear Panel • 1 x PS/2 Keyboard Port • 1 x DVI-D Port • 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))* • 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))* * ACPI wake-up function is supported on the rear USB ports only.
  • Página 10 • 1 x Front Panel Audio Connector • 3 x USB 2.0 Headers (Support 6 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD Protection (ASRock Full Spike Protection)) * USB_11_12 is shared with USB_9_10.
  • Página 11 * To install Windows® 7 OS, a modified installation disk with xHCI drivers packed into the ISO file is required. Please refer to page 124 for more detailed instructions. * For the updated Windows® 10 driver, please visit ASRock’s website for details: http://www.asrock.com • FCC, CE, WHQL...
  • Página 12 Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Página 13 H110M-DS/Hyper 2.1 Installing the CPU 1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket.
  • Página 15 H110M-DS/Hyper Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Página 16 2.2 Installing the CPU Fan and Heatsink...
  • Página 17 H110M-DS/Hyper 2.3 Installing Memory Modules (DIMM) This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
  • Página 19 H110M-DS/Hyper 2.4 Expansion Slots (PCI Express Slots) There are 2 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Página 20 2.5 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Página 21 H110M-DS/Hyper Chassis Intrusion and Please connect the SPEAKER DUMMY Speaker Header chassis intrusion and the DUMMY (7-pin SPK_CI1) chassis speaker to this (see p.1, No. 14) header. SIGNAL DUMMY Serial ATA3 Connectors These four SATA3 (SATA3_0: connectors support SATA see p.1, No. 8)
  • Página 22 Front Panel Audio Header This header is for PRESENCE# MIC_RET (9-pin HD_AUDIO1) connecting audio devices OUT_RET (see p.1, No. 19) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly.
  • Página 23 H110M-DS/Hyper ATX 12V Power This motherboard pro- Connector vides an 8-pin ATX 12V (8-pin ATX12V1) power connector. To use a (see p.1, No. 1) 4-pin ATX power supply, please plug it along Pin 1 and Pin 5. Serial Port Header...
  • Página 24 1 Einleitung Vielen Dank, dass Sie sich für das H110M-DS/Hyper von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Página 25 • Unterstützt DDR4 2133 non-ECC, ungepufferter Speicher • Unterstützt ECC-UDIMM-Speichermodule (Betrieb im Non- ECC-Modus) * Weitere Informationen finden Sie in der Speicherkompatibilitätsliste auf der ASRock-Webseite. (http://www.asrock.com/) • Systemspeicher, max. Kapazität: 32GB • Unterstützt Intel® Extreme Memory Profile (XMP) 2.0 • 1 x PCI-Express 3.0-x16-Steckplatz (PCIE1: x16-Modus)*...
  • Página 26 • 7.1-Kanal-HD-Audio (Realtek ALC887-Audiocodec) Audio * Zur Konfiguration von 7.1-Kanal-HD-Audio müssen Sie ein HD-Frontblenden-Audiomodul nutzen und den Mehrkanalton über den Audiotreiber aktivieren. • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • ELNA-Audiokondensatoren • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • Unterstützt Wake-On-WAN...
  • Página 27 • 1 x 8-poliger 12-V-Netzanschluss • 1 x Audioanschluss an Frontblende • 3 x USB 2.0-Stiftleisten (unterstützen 6 USB 2.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.0-Stiftleiste (unterstützt 2 USB 3.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) * USB_11_12-Anschluss wird mit USB_9_10-Anschluss geteilt.
  • Página 28 • FCC, CE, WHQL Zertifi- zierungen * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS- Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Página 29 H110M-DS/Hyper 1.3 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste Verbinden Sie Netzschalter,...
  • Página 30 Gehäuseeingriffs- und Bitte verbinden Sie Gehäusee- SPEAKER DUMMY Lautsprecher-Stiftleiste ingriffsvorrichtung und den DUMMY (7-polig, SPK_CI1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 14) Stiftleiste. SIGNAL DUMMY Serial-ATA-III-Anschlüsse Diese vier SATA3-Anschlüsse (SATA3_0: nehmen SATA-Datenkabel zum siehe S. 1, Nr. 8) Anschluss interner Speichergeräte (SATA3_1: mit einer Datenübertragungsgesc siehe S.
  • Página 31 H110M-DS/Hyper Audiostiftleiste Diese Stiftleiste dient dem PRESENCE# MIC_RET (Frontblende) Anschließen von Audiogeräten an OUT_RET (9-polig, HD_AUDIO1) der Frontblende. (siehe S. 1, Nr. 19) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt. Bitte befolgen Sie zum Installieren Ihres Systems die Anweisungen in unserer Anleitung und der Anleitung zum Gehäuse.
  • Página 32 ATX-12-V-Netzanschluss Dieses Motherboard bietet einen (8-polig, ATX12V1) 8-poligen ATX-12-V-Netzan- (siehe S. 1, Nr. 1) schluss. Bitte schließen Sie es zur Nutzung eines 4-poligen ATX- Netzteils entlang Kontakt 1 und Kontakt 5 an. Serieller-Port-Stiftleiste Diese COM1-Stiftleiste unterstützt RRXD1 DDTR#1 (9-polig, COM1) DDSR#1 ein Modul für serielle Ports.
  • Página 33 à modification sans préavis. En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notification préalable. Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous...
  • Página 34 • Supporte les processeurs jusqu’à 91W • Digi Power design • Alimentation à 5 phases • Prend en charge la technologie Intel® Turbo Boost 2.0 • Prend en charge le moteur Hyper BCLK ASRock • Intel® H110 Chipset • Technologie mémoire double canal DDR4 Mémoire...
  • Página 35 • Prend en charge la fonction Wake-On-LAN • Protection contre les orages/décharges électrostatiques (Protection complète contre les pics ASRock) • Prend en charge la détection de câble LAN • Prend en charge la fonction d’ é conomie d’ é nergie Ethernet 802.3az...
  • Página 36 • 3 x embases USB 2.0 (6 ports USB 2.0 pris en charge) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 1 x embase USB 3.0 (2 ports USB 3.0 pris en charge) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock))
  • Página 37 Certifica- tions * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o vercloking présente certains risques, incluant des modifications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’...
  • Página 38 1.3 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Página 39 H110M-DS/Hyper Prise DEL d’alimentation Veuillez brancher SPEAKER DUMMY et emplacement sur châssis l'emplacement sur le châs- DUMMY (SPK_CI1 à 7 broches) sis et le haut-parleur du (voir p.1, No. 14) châssis sur ce connecteur. SIGNAL DUMMY Connecteurs Serial ATA3 Ces quatre connecteurs...
  • Página 40 Embase audio du panneau Cette embase sert au PRESENCE# frontal branchement des appareils MIC_RET OUT_RET (HD_AUDIO1 à 9 audio au panneau audio broches) frontal. OUT2_L (voir p.1, No. 19) J_SENSE OUT2_R MIC2_R MIC2_L 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé...
  • Página 41 H110M-DS/Hyper Connecteur d’alimentation Cette carte mère est dotée d’un connecteur (ATXPWR1 à 24 broches) d’alimentation ATX à 24 (voir p.1, No. 4) broches. Pour utiliser une alimentation ATX à 20 broches, veuillez effectuer les branche-ments sur la Broche 1 et la Broche 13.
  • Página 42 Web per informazioni specifiche relative al modello attualmente in uso. È possibile trovare l'elenco di schede VGA più recenti e di supporto di CPU anche sul sito Web di ASRock. Sito Web di ASRock http://www.asrock.com.
  • Página 43 • Supporta CPU fino a 91 W • Digi Power design • Potenza a 5 fasi • Supporta la tecnologia Intel® Turbo Boost 2.0 • Supporto di ASRock Hyper BCLK Engine • Intel® H110 Chipset • Tecnologia con memoria DDR4 a doppio canale Memoria • 2 x alloggi DIMM DDR4...
  • Página 44 • Realtek RTL8111GR • Supporta Wake-On-WAN • Supporta Wake-On-LAN • Supporto la protezione da fulmini/scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente) • Supporta il rilevamento cavo LAN • Supporta Energy Efficient Ethernet 802.3az • Supporta PXE • 1 x porta mouse PS/2 I/O pannello • 1 x porta tastiera PS/2...
  • Página 45 * Per installare Windows® 7, è necessario un disco di installazione modificato con i driver xHCI integrati nel file ISO. Fare riferimento a pagina 124 per altre istruzioni dettagliate. * Per il driver aggiornato di Windows® 10, visitare il sito ASRock all’indirizzo: http://www.asrock.com • FCC, CE, WHQL...
  • Página 46 * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking può...
  • Página 47 H110M-DS/Hyper 1.3 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Página 48 Collegamento altoparlante e Collegare l’intrusione SPEAKER intrusione telaio DUMMY telaio e l’altoparlante a DUMMY (SPK_CI1 a 7 pin) questo collegamento. (vedere pag. 1, n. 14) SIGNAL DUMMY Connettori Serial ATA3 Questi quattro connettori (SATA3_0: SATA3 supportano i cavi vedere pag. 1, n. 8) dati SATA per dispositivi (SATA3_1: di archiviazione interna,...
  • Página 49 H110M-DS/Hyper Header audio pannello Questo header serve a PRESENCE# MIC_RET anteriore collegare i dispositivi OUT_RET (AUDIO1_HD a 9 pin) audio al pannello audio (vedere pag. 1, n. 19) anteriore. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
  • Página 50 Connettore di alimentazione Questa scheda madre è dotata di un connettore (ATXPWR1 a 24 pin) di alimentazione ATX (vedere pag. 1, n. 4) a 24 pin. Per utilizzare un’alimentazione ATX a 20 pin, collegarla lungo il pin1 e il pin 13. Connettore di alimentazione Questa scheda madre è...
  • Página 51 Podrá encontrar las últimas tarjetas VGA, así como la lista de compatibilidad de la CPU, en el sitio web de ASRock. Sitio web de ASRock http://www.asrock.com.
  • Página 52 ECC) * Para obtener más información, consulte la lista de memorias compatibles en el sitio web de ASRock. (http://www.asrock.com/) • Capacidad máxima de la memoria del sistema: 32GB • Compatible con Extreme Memory Profile (XMP) 2.0 de Intel®...
  • Página 53 I/O • 1 puerto DVI-D • 2 puertos USB 2.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike))* • 2 puertos USB 3.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike))* * La función de reactivación ACPI solo se admite en los puertos USB traseros.
  • Página 54 ISO. Consulte la página 124 para obtener información más detallada. * Para obtener el controlador actualizado para Windows® 10, visite el sitio Web desde ASRock para obtener detalles: http://www.asrock.com...
  • Página 55 • FCC, CE, WHQL Certifica- ciones * Para obtener más información acerca del producto, visite nuestro sitio web: http://www.asrock.com Tenga en cuenta que existen ciertos riesgos relacionados con el overclocking (sobreacel- eración), incluyendo el ajuste de la configuración del BIOS, aplicando la Tecnología overcloking no vinculada o utilizando las herramientas de overclocking de tercera parte.
  • Página 56 1.3 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente so- bre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base. Cabezal del panel del Conecte el interruptor de PLED+...
  • Página 57 H110M-DS/Hyper Cabezal de intrusión de Conecte la intrusión de SPEAKER DUMMY chasis y de altavoces chasis y el altavoz del DUMMY (SPK_CI1 de 7 contactos) chasis a este cabezal. (consulte la pág.1, N.º 14) SIGNAL DUMMY Conectores Serie ATA3 Estos cuatro conectores...
  • Página 58 Cabezal de audio del panel Este cabezal se utiliza para PRESENCE# frontal conectar dispositivos de MIC_RET OUT_RET (HD_AUDIO1 de 9 pines) audio al panel de audio (consulte la pág.1, N.º 19) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. El Audio de Alta Definición (HDA, en inglés) es compatible con el método de sensor de conectores, sin embargo, el cable del panel del chasis deberá...
  • Página 59 H110M-DS/Hyper Conector de alimentación Esta placa base contiene un conector de aliment- (ATXPWR1 de 24 pines) ación ATX de 24 pines. (consulte la pág.1, N.º 4) Para utilizar una toma de alimentación ATX de 20 pines, conéctela en los Pines del 1 al 13.
  • Página 60 1 Введение Благодарим вас за приобретение надежной материнской платы ASRock H110M- DS/Hyper, выпускаемой под постоянным строгим контролем компании ASRock. Эта материнская плата обеспечивает великолепную производительность и характеризуется прочной конструкцией в соответствии с требованиями компании ASRock в отношении качества и долговечности.
  • Página 61 (Socket 1151) • Поддержка процессоров мощностью до 91 Вт • Digi Power design • Система питания 5 • Поддержка технологии Intel® Turbo Boost 2.0 • Поддержка системы ASRock Hyper BCLK Engine • Intel® H110 Чипсет • Двухканальная память DDR4 Память...
  • Página 62 * Для настройки 7.1-канального звук высокой четкости HD Audio используйте переднюю аудиопанель HD и активируйте функцию многоканального звука в аудиодрайвере. • Защита от перенапряжения (ASRock Full Spike Pro- tection) • Конденсаторы для аудиосистем ELNA • PCIE x1 Gigabit LAN 10/100/1000 Мб/с...
  • Página 63 • 1 x аудиоразъем на передней панели • 3 x Колодки USB 2.0 (до 6 портов USB 2.0) с защитой от электростатического напряжения (ASRock Full Spike Protection) • 1 x Колодка USB 3.0 (до 2 портов USB 3.0) с защитой...
  • Página 64 измененный установочный диск с драйверами xHCI, упакованными в файл ISO. Более подробные инструкции представлены на стр. 124. * Подробные сведения об обновлении драйвера Windows® 10 представлены на веб-сайте ASRock: http://www.asrock.com • FCC, CE, WHQL Сертификация * Для получения дополнительной информации об изделии посетите наш веб-сайт: http://www.asrock.com...
  • Página 65 H110M-DS/Hyper 1.3 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое повреждение материнской платы.
  • Página 66 Колодка с разъемами Предназначена для SPEAKER DUMMY датчика вскрытия корпуса подключения датчика DUMMY и динамика вскрытия корпуса и (7-контактный SPK_CI1) корпусного динамика. (См. стр. 1, № 14) SIGNAL DUMMY Разъемы Serial ATA3 Эти четырех разъемов (SATA3_0: SATA3 предназначены для См. стр. 1, № 8) подключения...
  • Página 67 H110M-DS/Hyper Аудиоколодка передней Эта колодка предназначена PRESENCE# панели MIC_RET для подключения OUT_RET (9-контактная, аудиоустройств к передней HD_AUDIO1) аудиопанели. OUT2_L (См. стр. 1, № 19) J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса...
  • Página 68 Разъем питания АТХ Эта материнская плата (24-контактный, снабжена 24-контактным ATXPWR1) разъемом питания АТХ. (См. стр. 1, № 4) Чтобы использовать 20-контактный разъем питания ATX, подключите его вдоль контакта 1 и контакта 13. Разъем питания АТХ 12 В Эта материнская плата (8-контактный, ATX12V1) снабжена...
  • Página 69 ASRock sem aviso prévio. Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando.
  • Página 70 • Suporta CPU até 91W • Digi Power design • Design com 5 fases de alimentação • Suporta a tecnologia Intel® Turbo Boost 2.0 • Suporta Mecanismo ASRock Hyper BCLK • Intel® H110 Chipset • Tecnologia de memória DDR4 de dois canais Memória...
  • Página 71 • Realtek RTL8111GR • Suporta Wake-On-WAN • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/EDS (Proteção Total Con- tra Picos ASRock) • Suporta Detecção de Cabo LAN • Suporta Energy Efficient Ethernet 802.3az • Suporta PXE • 1 x Porta PS/2 para mouse E/S do • 1 x Porta PS/2 para teclado...
  • Página 72 • 1 x conector de áudio do painel frontal • 3 x Plataformas USB 2.0 (Suporta 6 portas USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Plataforma USB 3.0 (Suporta 2 portas USB 3.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock))
  • Página 73 H110M-DS/Hyper * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros.
  • Página 74 1.3 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conec- tores irá causar danos permanentes à placa-mãe. Suporte do painel de Ligue o botão de PLED+ PLED-...
  • Página 75 H110M-DS/Hyper Intrusão do Chassi e Conecte a instrusão do SPEAKER Cabeçote de Autofalante chassi e autofalante do DUMMY DUMMY (SPK_CI1 de 7 pinos) chassia este cabeçote. (ver p.1, N.º 14) SIGNAL DUMMY Conectores série ATA3 Estes quatro conectores (SATA3_0: SATA3 suportam ver p.1, N.º...
  • Página 76 Suporte de áudio do painel Este suporte destina-se à PRESENCE# MIC_RET frontal conexão dos dispositivos OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de (ver p.1, N.º 19) áudio frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. O Áudio de alta definição suporta Sensor de Adaptador, mas o fio do painel no chassi deverá...
  • Página 77 H110M-DS/Hyper Conector de alimentação Esta placa-mãe inclui um conector de alimentação (ATXPWR1 de 24 pinos) ATX de 24 pinos. Para (ver p.1, N.º 4) utilizar uma fonte de alimentação ATX de 20 pinos, introduza-a no Pino 1 e Pino 13.
  • Página 78 ASRock'ın web sitesinde yer alacaktır.. Bu anakart ile ilgili olarak teknik destek almak istiyorsanız, lütfen kullandığınız model hakkında özel bilgiler için web sitemizi ziyaret edin. En güncel VGA kartları ve CPU destek listelerini de ASRock'ın web sitesinden bulabilirsiniz. ASRock web sitesi http://www.asrock.com.
  • Página 79 • Admite módulos de memoria UDIMM ECC (funcionamiento en modo no ECC) * Ayrıntılı bilgi için ASRock'ın web sitesindeki Bellek Desteği Listesine bakın. (http://www.asrock.com/) • Maksimum sistem belleği kapasitesi: 32GB • Intel® Üstün Bellek Profili (XMP) 2.0 özelliğini destekler • 1 x PCI Express 3.0 x16 Yuva (PCIE1:x16 modu)*...
  • Página 80 * 7.1 CH HD Ses konfigürasyonu için bir HD ön panel ses modülü kullanılmalı ve çok kanallı ses özelliği ses sürücüsüsü ile etkinleştirilmelidir. • Dalgalanma Koruması Destekler (ASRock Tam Ani Gerilim Koruması) • ELNA Ses Kapakları • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR...
  • Página 81 • 1 x Ön Panel Ses Bağlayıcısı • 3 x USB 2.0 Bağlantısı (6 USB 2.0 bağlantı noktası destek- ler) (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) • 1 x USB 3.0 Bağlantısı (2 USB 3.0 bağlantı noktası destek- ler) (ESD Koruması...
  • Página 82 * Detaylı ürün bilgisi için, lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojinin uygulanması ya da üçüncü kişilerin hız aşırtma araçlarının kullanılması da dahil olmak üzere tüm hız aşırtma işlemlerinin belirli bir risk taşıdığını unutmayın. Hız aşırtma, sisteminizin dayanıklılığını...
  • Página 83 H110M-DS/Hyper 1.3 Ekli Bağlantılar ve Bağlayıcılar Ekli bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ile bağlayıcılar üzerine yerleştirilmesi, anakarta kalıcı hasar verebilir. Sistem Paneli Bağlantısı Güç anahtarını bağlayın,...
  • Página 84 Kasa Yetkisiz Erişim ve Lütfen kasa yetkisiz erişim SPEAKER DUMMY Hoparlör Bağlantısı ve kasa hoparlörünü bu DUMMY (7 pimli SPK_CI1) bağlantıya takın. (bkz. sf.1, No. 14) SIGNAL DUMMY Seri ATA3 Bağlayıcıları Bu dört SATA3 bağlayıcısı, (SATA3_0: veri aktarım hızı 6,0 Gb/ bkz.
  • Página 85 H110M-DS/Hyper Ön Panel Ses Bağlantısı Bu bağlantı, ses aygıtlarının PRESENCE# (9-pin HD_AUDIO1) MIC_RET ön ses paneline bağlanması OUT_RET (bkz. sf.1, No. 19) içindir. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Yüksek Tanımlı Ses, Jak Algılama özelliğini destekler, ancak bu işlevin düzgün çalışabilmesi için kasa üzerindeki panel kablosunun HDA işlevini desteklemesi...
  • Página 86 ATX 12V Güç Bağlayıcısı Bu anakart, 8-pin ATX (8-pin ATX12V1) 12V güç bağlayıcısı (bkz. sf.1, No. 1) sağlamaktadır. 4-pin ATX güç beslemesi kullanmak için, lütfen Pin 1 ve Pin 5’ e bağlayın. Seri Bağlantı Noktası Bu COM1 bağlantısı seri RRXD1 DDTR#1 Bağlantısı...
  • Página 87 H110M-DS/Hyper 1 개요 ASRock H110M-DS/Hyper 마더보드를 구입해 주셔서 감사합니다 . 이 마더보드 는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성이 우수하며 , 품 질과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의...
  • Página 88 • DDR4 2133 비 ECC, 비버퍼링 메모리 지원 • ECC UDIMM 메모리 모듈 지원 ( 비 -ECC 모드에서 작동 ) * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목록을 참조하십시오 . (http://www.asrock.com/) • 시스템 메모리 최대 용량 : 32GB •...
  • Página 89 후면 패널 • PS/2 키보드 포트 1 개 • DVI-D 포트 1 개 • USB 2.0 포트 2 개 (ESD 보호 지원 (ASRock 풀 스파이크 보 호 ))* • USB 3.0 포트 2 개 (ESD 보호 지원 (ASRock 풀 스파이크 보...
  • Página 90 포함시킨 수정된 설치 디스크가 필요합니다 . 자세한 사용법 은 124 페이지를 참조하십시오 . * 업데이트된 Windows® 10 드라이브의 자세한 내용은 다음의 ASRock 웹사이트를 참조하십시오 .http://www.asrock.com • FCC, CE, WHQL 인증 * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com...
  • Página 91 H110M-DS/Hyper BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체 의 오버클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위 험이 따른다는 것을 유념하십시오 . 오버클로킹은 시스템 안정성에 영향을 주거 나 심지어 시스템의 구성 요소와 장치에 손상을 입힐 수도 있습니다 . 오버클로...
  • Página 92 1.3 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구 적으로 손상됩니다 . 시스템 패널 헤더 섀시의 전원 스위치 , PLED+ PLED- (9 핀 PANEL1) 리셋...
  • Página 93 H110M-DS/Hyper 섀시 침입 및 스피커 헤더 섀시 침입 및 섀시 스 SPEAKER DUMMY (7 핀 SPK_CI1) 피커를 이 헤더에 연결 DUMMY (1 페이지 , 14 번 항목 참조 ) 하십시오 . SIGNAL DUMMY 시리얼 ATA3 커넥터 이들 네 개의 SATA3 커...
  • Página 94 전면 패널 오디오 헤더 이 헤더는 오디오 장치 PRESENCE# MIC_RET (9 핀 HD_AUDIO1) 를 전면 오디오 패널에 OUT_RET (1 페이지 , 19 번 항목 참조 ) 연결하는 데 사용됩니 다 . OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와 이어가...
  • Página 95 H110M-DS/Hyper ATX 전원 커넥터 이 마더보드에는 24 핀 (24 핀 ATXPWR1) ATX 전원 커넥터가 탑 (1 페이지 , 4 번 항목 참조 ) 재되어 있습니다 . 20 핀 ATX 전원공급장치 를 사 용하려면 핀 1 과 핀 13 을 따라 연결하십...
  • Página 96 アルの内容は予告なしに変更するこ とがあります。 このマニュアルの内容に変更が あった場合には、 更新されたバージョンは、 予告なくASRock のウェブサイ トから 入手できるようになります。 このマザーボードに関する技術的なサポートが必要な 場合には、 ご使用のモデルについての詳細情報を、 当社のウェブサイ トで参照く だ さい。 ASRock のウェブサイ トでは、 最新の VGA カードおよび CPU サポート一覧 もご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock H110M-DS/Hyper マザーボード (マイクロ ATX フォームファクター) • ASRock H110M-DS/Hyper クイックインストールガイ ド...
  • Página 97 プロセッサ ーに対応 (ソケッ ト 1151) • 91W まで CPU をサポート • Digi Power design • 5 電源フェーズ設計 • Intel® ターボブースト 2.0 テク ノロジーをサポート • ASRock ハイパー BCLK エンジンに対応 • Intel® H110 チップ セット • デュアルチャンネル DDR4 メモリテク ノロジー メモリ...
  • Página 98 • 1 x PS/2 マウスポート リアパネル • 1 x PS/2 キーボードポート • 1 x DVI-D ポート • 2 x USB 2.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) * • 2 x USB 3.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) * * ACPI ウェイクアップ機能に対応するのは背面...
  • Página 99 • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit * Windows® 7 OS をインストールするために、 xHCI ドライバが ISO ファイルに含まれる変更されたインストールディスクが必 要です。 詳しい説明については 124 ページを参照してく ださい。 * 更新された Windows® 10 ドライバについては、 ASRock のウェ ブサイ トで詳細をご確認く ださい : http://www.asrock.com • FCC、 CE、 WHQL 認証...
  • Página 100 BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティ のオーバークロックツールの使用などを含む、 オーバークロックには、 一定のリス クを伴いますのでご注意く ださい。 オーバークロックするとシステムが不安定に なったり、 システムのコンポーネントやデバイスが破損するこ とがあります。 ご自分 の責任で行ってく ださい。 弊社では、 オーバークロックによる破損の責任は負いか ねますのでご了承く ださい。...
  • Página 101 H110M-DS/Hyper 1.3 オンボードのヘッダーとコネクター オンボードヘッダーとコネクターはジャンパーではありません。 これらヘッダーとコ ネクターにはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクター にジャンパーキャップを被せると、 マザーボードに永久損傷が起こるこ とがありま す。 システムパネルヘッダー 電源スイッチを接続 PLED+ PLED- (9 ピンパネル 1) し、 スイッチをリセッ ト PWRBTN# (p.1、 No. 12 参照) し、 下記のピン割り当 てに従って、 シャーシ RESET# のシステムステータス HDLED- 表示ランプをこのヘッ HDLED+ ダーにセッ トします。 ケーブルを接続する ときには、 ピンの+と...
  • Página 102 シャーシイントルージョンと シャーシイントルー SPEAKER DUMMY スピーカーヘッダー ジョンとシャーシス DUMMY (7 ピン SPK_CI1) ピーカーをこのヘッ (p.1、 No. 14 参照) ダーに接続してく ださ い。 SIGNAL DUMMY シリアル ATA3 コネクター これら 4 つの SATA3 コネクターは、 最高 6.0 (SATA3_0: p.1、 No. 8 参照) Gb/ 秒のデータ転送 速度で内部ストレー (SATA3_1: p.1、 No. 9 参照) ジデバイス用の...
  • Página 103 H110M-DS/Hyper フロントパネルオーディオヘ このヘッダーは、 フロ PRESENCE# ッダー ントオーディオパネル MIC_RET OUT_RET (9 ピン HD_AUDIO1) にオーディオデバイス (p.1、 No. 19 参照) を接続するためのも OUT2_L のです。 J_SENSE OUT2_R MIC2_R MIC2_L 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正しく機能するためには、 シャーシのパネルワイヤーが HDA をサポートしてい るこ とが必要です。 お使いのシステムを取り付けるには、 当社のマニュアルおよ びシャーシのマニュアルの指示に従ってく ださい。 2. ACʼ97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオー...
  • Página 104 ATX 電源コネクタ このマザーボードは (24 ピン ATXPWR1) 24 ピ ン ATX 電源コネ (p.1、 No. 4 参照) クタを提 供します。 20 ピンの ATX 電源を使 用するには、 ピ ン 1 と 13 番に合わせて 接続 してく ださい。 ATX 12V 電源コネクター このマザーボードは 8 (8 ピン ATX12V1) ピン ATX12V 電源コ (p.1、...
  • Página 105 性能。 由于主板规格和 BIOS 软件可能已更新,因此,本文档的内容可能会随时更改, 恕不另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上, 我们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的 网站以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 H110M-DS/Hyper 主板(Micro ATX 规格尺寸) • 华擎 H110M-DS/Hyper 快速安装指南 • 华擎 H110M-DS/Hyper 支持光盘 • 2 x 串行 ATA (SATA) 数据线(选购) • 1 x I/O 面板...
  • Página 106 • 支持 DDR4 2133 非 ECC,非缓冲内存 • 支持 ECC UDIMM 内存模块(非 ECC 模式下操作) * 请参阅华擎 网站上的 Memory Support List(内存支持列表) 了解详情。 (http://www.asrock.com/) • 支持系统内存最大容量:32GB • 支持 Intel® Extreme Memory Profile (XMP) 2.0 • 1 x PCI Express 3.0 x16 插槽(PCIE1:x16 模式 )* 扩充槽...
  • Página 107 H110M-DS/Hyper • 支持“加速媒体编解码器”: HEVC, VP8, VP9 • 通过 DVI-D 端口支持 HDCP • 通过 DVI-D 端口支持全高清 1080p Blu-ray (BD) 播放 • 7.1 CH 高清音频(Realtek ALC887 音频编解码器) 音频 * 要配置 7.1 CH 高清音频,需要使用高清前面板模块和通过 音频驱动程序启用多通道音频功能。 • 支持电涌保护(华擎全防护) • ELNA 音频电容 • PCIE x1 Gigabit LAN 10/100/1000 Mb/s •...
  • Página 108 • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit 操作系统 * 要安装 Windows® 7 OS,需要 xHCI 驱动程序已封装到 ISO 文件的经修改的安装盘。请参考第 124 页了解详情。 * 有关已更新的 Windows® 10 驱动程序,请访问华擎网站了解 详情 : http://www.asrock.com • FCC、CE、WHQL 认证 * 有关详细产品信息,请访问我们的网站: http://www.asrock.com 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,...
  • Página 109 H110M-DS/Hyper 1.3 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装 到这些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配, PLED+ PLED- (9 针 PANEL1) 将机箱上的电源开关、 PWRBTN# (见第 1 页, 第 12 个) 重置开关和系统状态指 示灯连接到此接脚。在 RESET# 连接线缆前请记下正负 HDLED- 针脚。 HDLED+ PWRBTN(电源开关): 连接到机箱前面板上的电源开关。您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。如果计算机死机,无法执行正常重新启动, 按重置开关重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统 处在 S1/S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,...
  • Página 110 机箱侵入和扬声器接脚 请将机箱侵入和机箱扬 SPEAKER DUMMY (7 针 SPK_CI1) 声器连接到到此接脚。 DUMMY (见第 1 页,第 14 个) SIGNAL DUMMY 串行 ATA3 接口 这 4 个 SATA3 接口支持 最高 6.0 Gb/s 数据传输 (SATA3_0: 见第 1 页, 第 8 个) 速率的内部存储设备的 SATA 数据线。 (SATA3_1: 见第 1 页, 第 9 个) (SATA3_2: 见第...
  • Página 111 H110M-DS/Hyper 前面板音频接脚 此接脚用于将音频设备 PRESENCE# MIC_RET (9 针 HD_AUDIO1) 连接到前音频面板。 OUT_RET (见第 1 页,第 19 个) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。 请按照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。...
  • Página 112 ATX 12V 电源接口 此主板提供 8 针 ATX (8 针 ATX12V1) 12V 电源接口。要使用 4 (见第 1 页,第 1 个) 针 ATX 电源,请沿针脚 1 和针脚 5 插接它。 串行端口接脚 此 COM1 接脚支持串行 RRXD1 DDTR#1 DDSR#1 (9 针 COM1) 端口模块。 CCTS#1 (见第 1 页,第 18 个) RRI#1 RRTS#1 TTXD1...
  • Página 113 H110M-DS/Hyper 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。...
  • Página 114 由於主機板規格及 BIOS 軟體可能會更新,所以本文件內容如有變更,恕不另 行通知。如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的 特定資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網 站 http://www.asrock.com。 1.1 包裝內容 • 華擎 H110M-DS/Hyper 主機板 (Micro ATX 尺寸 ) • 華擎 H110M-DS/Hyper 快速安裝指南 • 華擎 H110M-DS/Hyper 支援光碟 • 2 x Serial ATA (SATA) 資料纜線(選用) • 1 x I/O 面板外罩...
  • Página 115 H110M-DS/Hyper 1.2 規格 • Micro ATX 尺寸 平台 • 固態電容設計 • 支援第 6 代 Intel® Core i7/i5/i3/Pentium®/Celeron® 處理器 (插座 1151) • 支援高達 91W 的 CPU • Digi Power design • 5 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 • 支援華擎 Hyper BCLK 引擎...
  • Página 116 • 支援加速媒體轉碼器: HEVC, VP8, VP9 • 支援含 DVI-D 連接埠的 HDCP • 支援透過 DVI-D 連接埠的 Full HD 1080p 藍光 (BD) 播放 • 7.1 CH HD 音訊(Realtek ALC887 音訊轉碼器)功能 音訊 * 若要設定 7.1 CH HD 音訊,必須使用 HD 前面板音訊模組, 並透過音訊驅動程式啟用多聲道音訊功能。 • 支援突波保護(華擎全防護) • ELNA 音響級電容 •...
  • Página 117 • Microsoft® Windows® 10 64 位元/ 8.1 64 位元/ 7 32 位元/ 作業系統 7 64 位元 * 若要安裝 Windows® 7 作業系統,需要使用修改過的安裝光 碟(已將 xHCI 驅動程式封裝至 ISO 檔案)。如需詳細說明, 請查看第 124 頁。 * 關於最新 Windows® 10 驅動程式的詳細資訊,請瀏覽華擎網 站:http://www.asrock.com • FCC、CE、WHQL 認證 * 如需產品詳細資訊,請上我們的網站: http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、 採用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定 性,或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成 本。我們對於因超頻所造成的可能損害概不負責。...
  • Página 118 1.3 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽 套在排針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排 PLED+ PLED- 列將機殼上的電源開 (9-pin PANEL1) PWRBTN# (請參閱第 1 頁, 編號 12) 關、重設開關及系統 狀態指示燈連接至此 RESET# 排針。在連接纜線之 HDLED- 前請注意正負針腳。 HDLED+ PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方 式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動,按下 重設開關即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此...
  • Página 119 H110M-DS/Hyper 機殼防護排針 機殼防護排針連接至 SPEAKER DUMMY 此排針。 (7-pin SPK_CI1) DUMMY (請參閱第 1 頁,編號 14) SIGNAL DUMMY Serial ATA3 接頭 這四組 SATA3 接頭 皆支援內部儲存裝置 (SATA3_0: 請參閱第 1 頁,編號 8) 的 SATA 資料纜線, 最高可達 6.0 Gb/s 資 (SATA3_1: 請參閱第 1 頁,編號 9) 料傳輸率。...
  • Página 120 前面板音訊排針 本排針適用於連接音 PRESENCE# MIC_RET 訊裝置至前面板音 (9-pin HD_AUDIO1) OUT_RET (請參閱第 1 頁,編號 19) 訊。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必 須支援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C.
  • Página 121 H110M-DS/Hyper ATX 12V 電源接頭 本主機板配備一組 8-pin ATX 12V 電 (8-pin ATX12V1) (請參閱第 1 頁,編號 1) 源接頭。若要使 用 4-pin ATX 電源供應 器,請插入 Pin 1 及 Pin 5。 序列連接埠排針 此 COM1 排針支援 RRXD1 DDTR#1 DDSR#1 序列連接埠模組。 (9-pin COM1) CCTS#1 (請參閱第 1 頁,編號 18)...
  • Página 122 • Mendukung DDR4 2133 non-ECC, memori tanpa buffer • Mendukung modul memori ECC UDIMM (beroperasi dalam mode non-ECC) * Lihat Daftar Dukungan Memori pada situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) • Kapasitas maksimum memori sistem: 32GB • Mendukung Intel® Extreme Memory Profile (XMP) 2.0 • 1 x Slot PCI Express 3.0 x16 (PCIE1:x16 mode)*...
  • Página 123 Panel I/O • 1 x Port Keyboard PS/2 Belakang • 1 x Port DVI-D • 2 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection))* • 2 x Port USB 3.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection))* * Fungsi pengaktifan ACPI hanya didukung pada port USB belakang.
  • Página 124 ISO. Untuk petunjuk lebih rinci, lihat halaman 124. * Untuk driver Windows® 10 terbaru, kunjungi situs web ASRock untuk mendapatkan info rinci:http://www.asrock.com • FCC, CE, WHQL Sertifikasi * Untuk informasi tentang produk rinci, kunjungi situs web kami: http://www.asrock.com...
  • Página 125 H110M-DS/Hyper Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan dapat mengakibatkan kerusakan komponen dan perangkat sistem. Risiko dan biaya apapun menjadi tanggungan Anda. Kami tidak bertanggung jawab atas...
  • Página 126 Requirements • A Windows® 7 installation disk or USB drive • USB 3.0 drivers (included in the ASRock Support CD or website) • A Windows® PC • Win7 USB Patcher (included in the ASRock Support CD or website) Scenarios...
  • Página 127 Select the “Win7 Folder” from Step1 by clicking the red circle as shown as the picture below. Step 4 Select the “USB Driver Folder” by clicking the red circle as shown as the picture below. If you are using ASRock’s Support CD for the USB 3.0 driver, please select your CD-ROM.
  • Página 128 Step 5 Select where to save the ISO file by pressing the red circle as shown as the picture below. Step 6 If you want to burn the patched image to a CD, please check “Burn Image” and select “Target Device to Burn”.
  • Página 129 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp...
  • Página 130 EC-Declaration of Conformity For the following equipment: Motherboard (Product Name) H110M-DS/Hyper / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) is herewith confirmed to comply with the requirements set out in the Council...