Bahco BCL32G1 Traducción De Las Instrucciones Originales página 7

5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
Recycle
....................
Class II Tool
....................
Do not incinerate and put the battery
on fire
..................
Do not wet
....................
a.c. Alternating Current
.................
W Watts
.......................
Hz Hertz
....................
kg Kilograms
....................
Kilograms - Centimeter
kg-cm
......
Little residual NLGI #2 grease on tool due to quality chek
6. FEATURES
7 8
2
1
3
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the
2. To remove the battery pack, push the button on the battery pack and
3. To insert the battery pack, align the tool unit slides with the battery
4. Do not force the battery pack in sliding it into tool unit. If the battery
d.c.
V
/min
mm
ft-lb
9
5
4
battery pack.
pull the tool unit from the battery pack in the direction.
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
pack does not slide in easily, it is not being inserted correctly.
• 7
Do not throw in Garbage
....................
Indoor use only
..................
Do not recharge if the battery is broken
or damaged
....................
Risk of electric shock
................
Direct Current
...............
Volts
........................
Revolutions or Reciprocations per Minute
............
Millimeter
..............
Foot-Pound
..............
1. Pressure Safety Valve
2. Fill Plug
3. Outlet Valve
4. Outlet Hose
5. Grease Container
6
6. Coupler
7. Driving Motor
8. Air Vent Valve
9. Main Switch
•