Publicidad
Idiomas disponibles
Idiomas disponibles
Pump/Control Access:
20" (50.8 cm) W X
15" (38.1 cm) H
Product Information
Applicable product:
Drop-in rim-style, custom pump
Fixture*:
Bathing well:
Basin area, bottom
46" (116.8 cm) x 20" (50.8 cm)
Basin area, top
55" (139.7 cm) x 22" (55.9 cm)
Weight
49 lbs (22 kg)
To overflow:
Water depth
12-1/2" (31.8 cm)
Capacity
49 gal (185 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Pump:
V
1-speed
120
Minimum access panel
pump/control (required):
1012641-1-B
1" (2.5 cm)
16"
(40.6 cm)
7-3/4"
7-1/2"
(19.7 cm)
(19.1 cm)
2-7/8"
(7.3 cm)
K-1106-CN
Hz
A
60
7.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
60" (152.4 cm)
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (177 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in
Rim
Detail
1-1/2"
32" (76.2 cm)
(3.8 cm)
18-1/8"
(46 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.
Publicidad
