Cafe CVM721 El Manual Del Propietario página 18

Other Features
Chef Connect
Use the Chef Connect feature for connecting your
microwave to a GE Appliances range to sync your vent
fan, cooktop surface lights and clock via
Bluetooth technology.
1. You must have a Chef Connect enabled range. To
pair your microwave for the first time, initiate the Chef
Connect process on the GE Appliances range. Refer
to the range owner's manual for instructions
2. On the microwave, hold Chef Connect button for 3
seconds. The Bluetooth icon
flashing as the microwave starts to search and pair
with your GE Appliances range. The icon
ON after pairing successfully.
If a GE Appliances range is not found within 2 minutes
during search mode the microwave will stop searching
and the Bluetooth icon
On initial setup, the setup protocol will start.
If the Chef Connect feature is enabled the default
settings are as follows:
- Display clock sync: ON
- Auto cooktop light: ON (HIGH setting)
- Auto vent fan: OFF
- Auto off: 15 minutes
3. Select 1 to sync the surface lights to your GE
Appliances range. It allows the microwave surface
lights to turn on at HIGH level automatically when the
paired range's cooktop burner turns on.
18
on the display will start
will remain
will turn OFF.
4. Select 1 to sync the vent fan to your GE Appliances
range. This allows the microwave vent fan to turn on
at LOW speed automatically when the paired range's
cooktop burner turns on.
Pairing is now complete, the Chef Connect feature is
now on.
NOTE: If there is no sync option selected during
set up, 5 minutes after icon
return to stand-by mode.
After completing the setting per above steps, your
microwaves vent fan and cooktop light will be set
to turn on automatically when the cooktop burner is
turned on. The cooktop and range clock display will
be synced to display the same time. The vent fan and
cooktop light will be set to automatically turn off 15
minutes after the cooktop burner is turned off.
If desired, the light, fan, and auto off settings can
now be changed using settings options 4, 5, and 6,
respectively.
Press Chef Connect once to turn off and twice to
re-connect. The icon
In the case of an unintended disconnect such as lost
power to the microwave or range the connection will
remain after power resumed. For very short power
interruptions, the power may need to be reset in order
to reconnect
Chef
Connect
Hold 3 Sec
turns on, the units will
will illuminate when on.
49-7000113 Rev. 0