Uniteck UNIFIX 100.1 WB Manual Del Usuario página 5

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
DESCRIPTION
The Unifix 100.1 WB mounting bracket is especially designed to fix your Unisun 80.12M / 100.12M /
100.24M / 110.12BC photovoltaic panel on your boat/yacht.
They can be installed on all balconies or handrails with tubes from 20 to 45 mm in diameter (minimum
lenght of the tube : 170 mm).
Thanks to their structure and marine stainless steel screws and bolts, they are perfectly suited for use
in saline environments.
Equipped with a multi-position tilting system, Unifix brackets allow for an optimization of your panel's
performance depending on the chosen orientation.
• The arrangement of the sensors influences your electrical performance. Choose the optimum
tilt and orientation according to your environment. Avoid shaded areas or objects that may
cause shadows.
• For more energy, it is possible to use two solar systems:
- panels with the same orientation: installation in parallel (two panels + one regulator +
one wiring kit + branch connectors)
- panels with opposite orientations: two separate installations (one panel + one
controller + wiring kit) x2
Electrical performance depending on tilt and panel
orientation
0°
East 93%
South east 93%
South 93%
South west 93%
West 93%
www.uniteck.fr
30° 60°
90% 78%
96% 88%
100% 91%
96% 88%
90% 78%
EN
90°
55%
66%
68%
66%
55%
5/15