Cleco 3060AVL Serie Manual Del Producto página 2

EN
The original language of this manual is English.
Product Safety Information:
Intended Use:
This pneumatic grinder is to be used only for removing
material by utilizing appropriate abrasive wheels, rotary
files or other material removal cutting devices.
For additional product safety information refer to Apex
Tool Group, LLC or Apex Tool Group GmbH & Co.
OHG document GS-2007, General Safety Pneumatic
Grinders.
WARNING
The grinder must not be modified in any manner unless
approved in writing by Apex Tool Group, LLC or Apex
Tool Group GmbH & Co. OHG. All safety devices must
be properly installed and maintained in good working
order.
EC Declaration of Conformity:
We affirm that this machine is in accordance with
the following EC regulations (2006/42/EC). Applied
harmonized standards are ISO 12100:2010.
The name, job function and address of the person
authorized to compile the technical file.
Mr. Vishnu Irigireddy
Director of Global R&D- Mechanical Engineering
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
_______________________
Signature: Vishnu Irigireddy
Date: September 20, 2013
Noise and Vibration:
Sound Level dB(A)
(ISO15744)
Model
† Pressure
(L )
p
Refer to the specification table in the back of this manual
for individual model sound level and vibration values.
† K = 3dB measurement uncertainty
pA
‡ Kw = 3dB measurement uncertainty
A
* K = Vibration measurement uncertainty
Product Information
Vibration m/s
(ISO28927)
‡ Power
Level
(L )
w
Cleco
®
Air Line Lubrication:
Use Apex Tool Group, LLC or Apex Tool Group GmbH
& Co. OHG's lightweight air tool oil 500021 (available
in quantities shown in the following chart) or an SAE-5
lightweight spindle oil.
Part No.
540397
533485 1 US Gallon (3.78 liter)
Air Supply Line:
Parameter
Air Hose
Working
pressure range
Compressed air
Service and Repair:
Tool service and repair should be performed by an
authorized Apex Tool Group, LLC or Apex Tool Group
GmbH & Co. OHG Center. Refer to the last page of this
manual for locations.
Disposal:
Observe local disposal guidelines for all
components of this tool and its packaging.
Copywright Protection:
Apex Tool Group, LLC or Apex Tool Group GmbH &
Co. OHG reserves the right to modify, supplement or
improve this document or the product without prior
notice. This document may not be reproduced in any
way, shape or form, in full or parts thereof, or copied to
another natural or machine readable language or to a
2
data carrier, whether electronic, mechanical, optical or
otherwise without the express permission of Apex Tool
*K
Group, LLC or Apex Tool Group GmbH & Co. OHG
Page 2
Packaged
1 Quart (0.94 liter) Airlube 10W/NR-420LB DR
Airlube 10W/NR-420LB DR
Description
Minimum inside diameter:
3/4" (19mm)
Maximum length: 8.0' (2.4 m)
Performance rated at: 90 psi (620 kPa)
Air quality according to ISO 8573-1, quality
class 2.4.3
The compressed air must be clean and dry.
PL30-1066
11/21/2014
Designation