GYS MATIC 5.13 XXL Manual De Instrucciones página 9

Translation of the original instructions
• Internal delay potentionmeter: Time to get the clear state back.
3
Delay is designed for slower switching time to clear state to eliminate remained bright rays.
The internal shade range selector allows to choose the shade range between 5-9 or 9-13.
4
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens may constitute a safety hazard or result
in irreparable damage to the module.
HEADBAND ADJUSTMENT
1
2
3
MAINTENANCE
• Expiration date: No expiration date for this product but the state of the Hermès GYSMATIC LCD 5/13 XXL welding helmet must be checked before
each use.
• The GYSMATIC LCD 5/13 XXL must not be dropped
• Do not put any heavy tools/objects in or on the helmet in order not to damage the filter or the protective screens.
The deterioration of the optoelectronic filter or its protective screen can reduce the vision field or the protection level. Replace the damaged parts.
• Do not use any tools or other sharp objects to remove any components of filter or helmet. Doing so may damage filter or helmet, preventing proper
function, possibly causing injury or cancellation of the warranty.
• Clean the filter with a clean cotton or lens cloth.
• Clean and change protective screens on a regular basis.
• Clean the inside and the outside of the helmet with a neutral disinfectant product.
• Do not use any solvent.
REPLACEMENT OF INSIDE AND OUTSIDE PROTECTIVE SCREENS.
REPLACING BATTERIE
The opto-electronic filter requires one 3V lithium battery (CR2450).
Follow the instructions below to change batteries:
- Pull the cover (11) and then remove the battery.
- Place a new battery in position. Polarity «+» must stay visible.
- Put the cover back (11).
- We recommend to replace the battery once a year.
CAUTION
GYSMATIC 5.13 XXL
Clear shade 4
Dark shade 5-13
Filter dimension 114x133x10mm
Reaction speed 0.08 ms
Power supply Solar + battery
Weight 460 gr
Field of vision 100x83mm
Applications MMA 5>400A / TIG 5>250A / MIG-MAG 5>500A / Grind
Warranty
2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
4
The headband HG-2003 is lightweight and ergonomic. Its 3 points adjus-
table balance design provides more flexibility and comfort.
1- Headband adjustment
2- Headband slider(with 5 slots)
3- Block washer adjustment
4- Longitudinal adjustment
1. Unscrew the fixation screw (A).
2. Replace the internal (B) on the LCD filter.
3. Replace the external screen (C).
4. Put the fixing back and screw it on (A).
9
EN