Tripp-Lite WEBCARDLX El Manual Del Propietario página 4

Installation
Warning: When handling the WEBCARDLX or WEBCARDLXMINI, follow standard ESD
(electrostatic discharge) precautions to avoid damaging the card. For your safety, you
should also read the documentation that came with your UPS system or PDU to
familiarize yourself with precautions against electric shock.
1 - Preparation
1-1
Confirm Package Contents: In addition to this manual, your package should
include the accessory card in an anti-static bag, a cable (73156A), a MAC
address label and several faceplates. If anything is missing, contact your
supplier immediately. Additional documentation and two Management
Information Base (MIB) files (Tripplite.mib and RFC1628.mib) for use with
Network Management Systems (not otherwise required) can be found by going
to www.tripplite.com/support and typing WEBCARDLX in the search field.
1-2
Install UPS: Install your UPS system and turn it on before installing the
WEBCARDLX or WEBCARDLXMINI. Ensure that the accessory card slot is accessible.
1-3
Locate the WEBCARDLX / WEBCARDLXMINI MAC Address: The 12-digit MAC
address (in the format XX XX XX XX XX XX) is printed in two locations: a label
attached to the underside of the card and a duplicate label inside the box.
Attach the duplicate label to the UPS system or keep it in a secure location for
easy reference.
1-4
Insert WEBCARDLX / WEBCARDLXMINI in Accessory Slot: Use a screwdriver
to remove the accessory slot cover from the UPS. While the UPS is turned on,
align the WEBCARDLX or WEBCARDLXMINI with the guides in the accessory slot
and push the card into the slot until the card is fully seated. Align and attach the
faceplate that matches your UPS using the screws you removed to take off the
accessory slot cover. The ports should be nearly flush with the face of the UPS.
1-5
Address Assignment: If your network's DHCP server will assign an IP address
to the WEBCARDLX, proceed to 2 - Dynamic IP Address Assignment. If you
will assign a static IP address to the WEBCARDLX or WEBCARDLXMINI, proceed
to 3 - Static IP Address Assignment. If you are uncertain which method to
use, contact your network administrator for assistance before continuing the
installation process.
4