Brentwood Appliances KT-1900BK Instrucciones De Operación Y Seguridad página 5

Note: If you need to heat water again, let the appliance rest for 30-60 seconds
before starting again.
7. When heating is complete, make sure the power switch is on the "O" position,
and then unplug the product from the electrical outlet.
WARNING: Always unplug the product from the electrical outlet when it is not in
use or will be left unattended.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool before cleaning or storing
it.
NOTICE: To avoid damaging the product, do not pour cold water into the Appliance
after use and do not use abrasive cleaners/pads to clean any part of the product.
• Make sure the Kettle is empty and has had time to cool before handling it.
• Do not run any part of this appliance in the Dishwasher.
• Remove Kettle from base and clean with a non-abrasive cleaner and warm soapy
water.
• Base should only be cleaned with a soft damp towel and dried before storing. DO
NOT USE RUNNING WATER.
• Dry all parts thoroughly before storing or using again.
5