Using The Device - media-tech U-DRIVE UP MT4045 Manual Del Usuario

Tabla de contenido

Publicidad

Using the device

EN
Plug input DC to power on the device and start to record
automatically. You can power on the device manually,
then press OK to start/finish recording.
If you want to protect file before deletion (if you have set
sequence time) during cycle mode press MODE button –
padlock icon will be shown in the top.
Viewing files using PC computer
Use USB cable and plug device into PC computer, then
select "Mass Storage" and click OK. Now you can copy file
from microSD card on to desktop.
Specification
• Car digital video recorder
• Video and sound recording
• Hi-res CMOS image sensor
• Motion picture resolution: up to 1080p Full HD (1920
x1080ppi) high video resolution @ 24fps (720p @ 30fps)
• 1,5" color LCD display
• Still image resolution: up to 12Mpix
• Wide angle lens: 120º
• 12x IR LEDs frontlight
• Supported media formats: AVI (MJPEG), JPG
• Motion detection
• Time stamp
• SOS function
4
All manuals and user guides at all-guides.com
• Cycle overwriting when memory is full
• Built in micro SD memory card socket (up to 32GB cards
are supported) *)
• Reliable on- glass mounting support
• Powered from car lighter socket
• Instant recording/end recording when engine started/
stopped
• Built-in lithium support battery (up to 10 min recording) **)
• Multilingual, easy to operate user menu
• Small size: 65x40x50mm
*) Note. Device requires high speed data recording. Please
use Class 6 or higher memory card. Class 4 or lower memory
cards can be not compatible.
**) Note. Camera must be powered by car power adaptor
included in the set. Built in battery is only for short time,
emergency powering in case of disabled main power.
Due to continuous development specification and appearance
of product are subject to change without prior notice. For tech-
nical support please visit www.media-tech.eu.

Publicidad

Tabla de contenido
loading

Tabla de contenido