Publicidad
Movie Mode settings:
EN
Movie Mode – select resolution and frame rate
Movie Quality – select compression
Movie Clip Time – recording can be split into short se-
quences [off/1min/3min/5min/10min]
Movie Off Time – define how long device will record after
losing power supply in DC input [immediately/5sec/30se
c/1min/2min/3min]
Sound Record [on/off ]
MIC Sensitivity – select microphone sensitivity level
Scene – select type of scene to help device determine
shutter speed [P-automatic/different modes]
Exposure – select exposure compensation within -2EV
and 2EV
White Balance – [autobalance/different modes]
Using the device
Plug input DC to power on the device and start to record
automatically. You can power on the device manually,
then press OK to start/finish recording.
When GPS info on the screen is in red: GPS fix is not set.
When GPS info on the screen is in green: GPS fix is set and
will be recorded along with movie.
If you want to protect file before deletion (if you have set
sequence time) during cycle mode press Emergency but-
ton – padlock icon will be shown in the corner.
4
Exporting files (using PC windows computer )
Install software from CD disc, please read software man-
ual for details.
You need to copy file from SD card on to desktop or plug
device via USB cable to computer (device must be set in
MSDC mode).
Use this software to export selected sequences.
Due to continuous development specification and appear-
ance of product are subject to change without prior notice.
For technical support please visit www.media-tech.eu.
Publicidad
