Schneider SLA 6100 Manual De Usario página 44

recommend not to connect, in any case,
the machine with extension cords, multi-
ple power sockets, etc to avoid overheat-
ing which are sources of potential fire
hazard. The manufacturer declines any
responsibility for damages due to failure
or inappropriate protective connecting
point.
To enhance safety, VDE in the direc-
tive DIN VDE 0100 in section 739, has
recommended to install a circuit breaker
(RCD) with a tripping current of 30 mA
(DIN VDE 0664).
If using a differential circuit breaker,
make sure it is type A, according to DIN
VDE 0664 and current sensitive buttons.
The rating plate provides information
on rated current absorption and relating
protection. Compare these data with the
power supply.
Figure 8
ElEctrical sHock
HaZarD
not kEEping to tHis
instruction coulD
EnDangEr tHE usEr.
tHis WasHing
rEQuirEs EartH Wiring.
For personal safety, this washing
machine must be grounded.
This washing machine is equipped
with a power cord (A) and with a
plug (B).
To minimize the risk of electric
shock, the cable must be plugged
into socket (C) that fits the plug (B).
If the socket is not available,
Figure 8b
macHinE
EN
13