Important Warnings - Schneider SLA 6100 Manual De Usario

possiblE rEmEDiEs
The vast majority of failures and faults that occur in daily use of the machine can be eliminated
personally. In many cases time and costs could be saved without necessarily having to contact
the manufacturer's authorized technical service centre.
The following table will aid to identify and possibly eliminate the causes of failure/malfunction.
However, keep in mind that:
!
Repairs to electrical equipment can be carried out
only by qualified and authorized. Repairs executed incor-
rectly can seriously threaten the safety of user.
the machine makes noise
all washing machines on the market produce very little noise, perceptible in washing
and spinning step. they measured between 55 and 80 db (a). these noises are consid-
ered audible according the European standard En iso 3741-2010.
the machine does not spinning/vibrates
this model is equipped with a special electronic device that prevents the start of spin-
ning if laundry load is particularly unbalanced, irregular discharge, excessive or non-
compliant detergent. this serves to reduce vibration, increase the silence and life span
of the washing machine.
For the smooth operation of the washing machine and to prevent an increase in noise and vibra-
tion or spin blockage, make sure to respect the following:
1. make sure that the transportation screws have been removed during installation.
2. Ensure that the drain pump filter is clean and make sure the exhaust pipe is not
choked and that the machine drains all the water well (as previously reported).
3. make sure the detergent used is for washing machine and use the right amount.
4. make sure the laundry load is not amassed or knotted.
5. Make sure the machine is well levelled on the floor (see chapter Installation).
What to do if....

important Warnings

EN
27