Fisher & Paykel Active Smart Guia Del Usuario página 15

Cleaning Care – Special Features
To Remove Trays
For ease of removal, empty food from tray/bin first.
Hold the centre front of the tray/bin handle.
Lift vertically to unclip from the runners and pull tray/bin towards you to remove.
Push runners back into refrigerator.
To Replace Trays
With the runners pushed back into the refrigerator, place the tray/bin on top of the runners.
Push the tray/bin back slowly until you feel it clip back onto the runners.
Important Note: Ensure that trays and bins are securely clipped onto the runners before use.
Important Note: Bin and tray runners are pre-lubricated, and will not need to be
re-lubricated during their life. Do not attempt to clean grease from the runners, as this will
affect their ability to function. Do not immerse runners in water.
Interior
Glass Shelves
Clean with warm water and detergent or a glass cleaner. If cleaning the shelves without
removing from the cabinet use only warm water and detergent as a glass cleaner can damage
the plastic components of your refrigerator.
Important Note: Many commercially available cleaning products contain solvents that
may attack the plastic components of your freezer and cause them to crack. It is important
to use only warm water and a small amount of liquid dishwashing detergent on any
plastic components inside and outside your freezer. Avoid using anti-bacterial cleaning
products on either the interior or exterior of the cabinet as they may cause rusting of metal
components and cracking of plastic components.
US
15