Remove Packaging - Fisher & Paykel DE27CW1 Instructivo De Instalacion Y Guia Del Usuario

Installation instructions
18
Installation
Parts and literature are packaged inside the dryer drum.
Use two or more people to move and install the dryer.
Failure to do so can result in back or other injury.
Only remove the packaging at the customer's premises. This will ensure the appliance arrives in
pristine condition and reduces the risk of damage when transporting to the customer's home.
Unpacking
Make sure dryer is in a suitable location for installation.
Consider installing the dryer before the washing machine in a side by side installation, this will
allow better access to electrical and exhaust connections.

Remove packaging

1.
1. Remove straps.
4.
4. Remove the carton
by lifting it off the
product (do not cut
the carton off ).
WARNING!
Excess Weight Hazard
2.
2. Unfold the bottom
flaps on the carton.
5.
Tilt
Walk
off
Slide out
5. Remove the basepacker
by tilting the product
back and walking the
product off it.
3.
3. Unfold the top flaps on
the carton, remove top
packer.
6.
6. Remove the drum
packer and the tape
from the lint collector
bucket in the drum.