Testing - ORILUX THP05NP Manual De Instrucciones

UP-ALLOW
LED screen
1． Operation Display
A. The display shows Temperature of the swimming pool water when the
machine is on.
2． Water temperature setting
A． Available no matter the machine is on or off;
B． Press the key
twinkling temp. Press
B. 5 seconds later, the controller display will back to the normal mode.
C. When you want to check setting temperature, press
current setting.
VII.

Testing

1．Inspection before use
A．Check installation of the whole machine and the pipe connections according to
the pipe connecting drawing;
B．Check the electric wiring according to the electric wiring diagram; and earthing
connection;
C．Make sure that the main machine power switch is off;
D．Check the temperature setting;
E．Check the air inlet and outlet.
2．Trial
A．The user must "Start the Pump before the Machine, And Turn off the Machine
before the Pump", or the machine will be damaged;
B．The user should start the pump, check for any leakage of water; and then set
41
Set required temperature
Display temperature and machine failure code
or to set water temperature. The controller indicates
or to adjust to your required water temp;
or to see the