Schneider SCBL15 Manual De Instrucciones página 28

First Use Notice
1) Remove all packaging and clean the jug, measuring cup and lid
thoroughly before using for the first time. Only clean the main unit with a
damp cloth. Never immerse the unit in water or place under running water.
The blender should be placed on flat surface before operation.
WARNING:
2) Do not plug in the appliance before assembling.
3) Place the appliance on a flat surface.
4) Place the glass jug on to the motor unit and lock into place by turning
clockwise.
5) Put the lid on top of the jug and push it down. Insert the measuring cup
into the cover and turn until it locks into place.
6) Make sure the appliance is turned off before plugging in.
How to Use
1) Before plugging in ensure that the mains voltage matches that shown on
the rating label.
2) This unit has a safety design; it will not work if the jug is not installed onto
the main body properly.
3) Turn the control dial to position 0 in order to make sure the unit is turned
off.
4) Place ingredients into the jug, do not exceed the maximum 1.5L capacity.
5) Stop the blender before adding new ingredients or use the measuring cup
to add ingredients while running.
IMPORTANT:
IMPORTANT:
working.
6) Put the cover on top of the jug ensuring it is fitted correctly.
7) Turn the control dial clockwise to your desired speed as you need, or use
the pulse function by turning dial anticlockwise
the blade is very sharp. Wash with care and
never touch the blade with your fingers.
Do not operate without any ingredients.
Do not open the lid while the blender is
EN-10